Using the Sound Control Memory (SCM)
You can select and store a preset sound adjustment suitable to each playback source. (Advanced SCM)
Selecting and storing the sound modes
Once you select a sound mode, it is stored in memory. It will be recalled every time you select the same source and will be shown on the display. A sound mode can be stored for each of the following sources — FM1, FM2, FM3, AM, CD.
•If you do not want to store the sound mode separately for each playback source, but want to use the same sound mode for all the sources, see “To cancel Advanced SCM” on page 15.
Select the sound mode you want.
•Each time you press the button, the sound mode changes as follows.
SCM
•When “SCM LINK” is set to “LINK ON”, the selected sound mode can be stored in memory for the current source and the effect applies only to the current source.
•When “SCM LINK” is set to “LINK OFF”, the selected sound mode effect applies to any source.
Indication | For: | Preset values | ||
|
| BAS | TRE | LOUD |
|
|
|
|
|
SCM OFF | (Flat sound) | 00 | 00 | ON |
|
|
|
|
|
BEAT | Rock or disco | +02 | 00 | ON |
| music |
|
|
|
|
|
|
|
|
SOFT | Quiet | +01 | OFF | |
| background |
|
|
|
| music |
|
|
|
|
|
|
|
|
POP | Light music | +04 | +01 | OFF |
|
|
|
|
|
Recalling the sound modes
When “SCM LINK” is set to “LINK ON,” select the source.
FM
CD
AM
Each time you change the playback source, the SCM indicator flashes on the display.
The sound mode stored in memory for the selected source is recalled.
Notes:
•You can adjust each sound mode to your preference, and store it in memory.
If you want to adjust and store your original sound mode, see “Storing your own sound adjustment” on page 14.
•To adjust the bass and treble reinforcement levels or to turn on/off the loudness function temporarily, see page 12. (Your adjustments will be cancelled if another source is selected.)
ENGLISH
13
