17
ENGLISH

Selecting the level display

You can select the level display according to your
preference.
When shipped from the factory, “AUDIO 2” is
selected.
1
Press and hold SEL (select) for more
than 2 seconds.
“CLOCK H,” “CLOCK M,”
“LEVEL,” or “EXT IN”
appears on the display.
2
Select “LEVEL” if not shown on the
display.
3
Select the desired mode.
• AUDIO 1: Shows the audio level indicator.
• AUDIO 2: Alternates “AUDIO 1” setting
and illumination display.
• OFF: Erases the audio level indicator.
4
Finish the setting.
OTHER MAIN FUNCTIONS

Selecting the external

component to use

You can connect the external component to the
CD changer jack on the rear using the Line Input
Adapter KS-U57 (not supplied).
To use the external component as the playback
source through this unit, you need to select
which component to use—CD changer or
external component.
When shipped from the factory, CD changer is
selected as the external component.
Note:
For connecting the Line Input Adapter KS-U57 and the
external component, refer to the Installation/Connection
Manual (separate volume).
1
Press and hold SEL (select) for more
than 2 seconds.
“CLOCK H,” “CLOCK M,”
“LEVEL,” or “EXT IN”
appears on the display.
2
Select “EXT IN” if not shown on the
display.
3
Select the desired component.
• LINE IN: To use the external component
other than CD changer.
• CHANGER: To use the CD changer.
4
Finish the setting.
EN17-18_KD-SX745_695[U]f.p65 11/26/02, 11:04 AM17