JVC GET0133-001B, KD-SX696 Troubleshooting, Symptoms Causes Remedies, Stored in memory are erased

ENGLISH

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service center.

		Symptoms	Causes		Remedies
	•	Sound cannot be heard	The volume level is set to the	Adjust it to the optimum level.
		from the speakers.	minimum level.
			Connections are incorrect.	Check the cords and
General				connections.
	•	at all.	have function incorrectly due to	press		(standby/on/
		The unit does not work	The built-in microcomputer may	While holding SEL (select),
			noise, etc.	attenuator) for more than 2
				seconds to reset the unit. (The
				clock setting and preset stations
				stored in memory are erased.)
				(See page 2.)
	•	CD automatically ejects.	CD is inserted upside down.	Insert the CD correctly.
	• CD-R/CD-RW cannot be		CD-R/CD-RW is not finalized.	• Insert a finalized CD-R/CD-RW.
		played back.		• Finalize the CD-R/CD-RW
	• Tracks on the CD-R/CD-			with the component which you
		RW cannot be skipped.		used for recording.
	• CD can be neither		CD is locked.	Unlock the CD. (See page 14.)
		played back nor ejected.
			The CD player may function	While holding			(standby/
Playback			incorrectly.	on/attenuator), press 0 (eject)
				it is ejected.
				for more than 2 seconds. Be
				careful not to drop the CD when
CD
	• CD sound is sometimes		You are driving on rough roads.	Stop CD playback while driving
		interrupted.		on rough roads.
			CD is scratched.	Change the CD.
			Connections are incorrect.	Check the cords and
				connections.
	• “NO DISC” appears on		No CD is in the loading slot.	Insert a CD into the loading slot.
		the display.
			CD is inserted incorrectly.	Insert the CD correctly.

24