JVC GET0140-001A manual Tape Operations, Listening to a cassette, English, Open the control panel

TAPE OPERATIONS

ENGLISH

Listening to a cassette

You can play back type I (normal) tapes.

1 Open the control panel.

Note on One-Touch Operation:

When a cassette is already in the cassette compartment, pressing TAPE (CD-CH) turns on the unit and starts tape play automatically.

2 Insert a cassette into the cassette compartment.

The unit turns on and tape play starts automatically.

3 Close the control panel by hand.

4 Select the tape direction.

Each time you press 23, the tape direction changes alternately between forward

(	) and reverse
(	).

To stop play and eject the cassette

Press 0.

Tape play stops, the control panel flips down. The cassette automatically ejects from the cassette compartment. The source changes to the previously selected one.

If you change the source, tape play also stops (without ejecting the cassette this time).

•You can also eject the cassette by pressing 0 while the unit is turned off.

To fast-forward and rewind a tape

Press and hold ¢ for more than one second to fast-forward the tape. When the tape reaches its end, the tape is reversed and playback starts from the beginning of the other side.

Press and hold 4 for more than one second to rewind the tape.

When the tape reaches its end, playback of the same side starts.

To stop fast-forward and rewind at any position on the tape, press 23.

Tape play starts from that position on the tape.

Notes:

•When one side of the tape reaches its end during play, the other side of the tape automatically starts playing. (Auto Reverse)

•When the tape reaches its end while fast- forwarding, the tape direction will be changed automatically.

18