JVC GET0143-001A, KD-SC945 manual Troubleshooting, Symptoms Causes Remedies, Connections, Disc

ENGLISH

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service center.

		Symptoms	Causes	Remedies
	•	Sound cannot be heard	The volume level is set to the	Adjust it to the optimum level.
		from the speakers.	minimum level.
			Connections are incorrect.	Check the cords and
General				connections.
	•	at all.	have function incorrectly due to	panel holder after detaching the
		The unit does not work	The built-in microcomputer may	Press the reset button on the
			noise, etc.	control panel. (The clock setting
				and preset stations stored in
				memory are erased.)
				(See page 2.)
	•	SSM (Strong-station	Signals are too weak.	Store stations manually.
FM/AM		Sequential Memory)
		automatic preset does
		not work.
	• Static noise while		The antenna is not connected	Connect the antenna
		listening to the radio.	firmly.	firmly.
	•	Disc cannot be played	Disc is inserted upside down.	Insert the disc correctly.
		back.
	• CD-R/CD-RW cannot be		CD-R/CD-RW is not finalized.	• Insert a finalized CD-R/CD-RW.
		played back.		• Finalize the CD-R/CD-RW
	• Tracks on the CD-R/CD-			with the component which you
		RW cannot be skipped.		used for recording.
Playback
	•	Disc cannot be ejected.	Disc is locked.	Unlock the disc. (See page 22.)
	•	Disc sound is sometimes	You are driving on rough roads.	Stop playback while driving on
Disc		interrupted.		rough roads.
			Disc is scratched.	Change the disc.
			Connections are incorrect.	Check the cords and
				connections.
	•	“NO DISC” appears on	No disc is in the loading slot.	Insert a disc into the loading slot.
		the display.
			Disc is inserted incorrectly.	Insert the disc correctly.

36