JVC GET0143-001A, KD-SC945 Changing the standard plate

35

ENGLISH

Changing the standard plate

You can change the standard plate with another

plate supplied with your unit.

You can also download them by visiting

<http://www.jvc.co.jp/jvccar>.

•When changing the plate, be careful not to

leave your fingerprints on the plate or cover.

1

Loosen the screws with the supplied

hex screwdriver.

2

Remove the plate cover and the

standard plate.

3

Replace with another plate (a

standard, cutout, or downloaded

plate) of your preference.

• When attaching a standard plate

Plate cover

Standard

plate

• When attaching a cutout or downloaded

plate

Add the transparent plate (supplied)

between the cutout or downloaded plate

and the plate cover in order to attach the

plate cover in place.

Notes:

• Be sure to keep the hex screwdriver for future use.

• Four spare screws for the plate cover attachment

are provided with the unit. (See the Installation/

Connection Manual.)

• When you attach the plate cover, do not tighten the

screws too hard; otherwise, the plate cover might be

cracked.

How to use the cutout plates

1Unfold the supplied cutout plates.

2Cut the plates out using a scissors.

3Trim out the window and two knobs using a

knife on a rubber mat.

Plate cover

Standard

plate

Plate cover

Cutout or

downloaded plate

Transparent plate

(supplied)

EN31-35_KD-SC945[U]f.p65 1/13/03, 12:27 PM35

Contents

Main INSTRUCTIONS CD === !" IMPORTANT FOR LASER PRODUCTS Precautions: How to use the M (MODE) button How to reset your unit CONTENTS LOCATION OF THE BUTTONS Control panel Display window Remote controller 3 WARNING: CAUTION: Preparing the remote controller Installing the battery 1 2 BASIC OPERATIONS Turning on the power Adjust the volume. Turn on the power. Select the source. Setting the clock RADIO OPERATIONS Listening to the radio FM1 FM2 FM3 AM Searching a station automatically: Auto search Select the band (FM1 3, AM). Storing stations in memory FM station automatic preset: SSM Select the FM band (FM1 3) you want to store FM stations into. Press and hold both buttons for more than 2 seconds. Tune in to a station you want while M (manual) is flashing. Tuning in to a preset station RDS OPERATIONS What you can do with RDS Tracing the same programme automatically (Network-Tracking Reception) To use Network-Tracking Reception Using TA Standby Reception Using PTY Standby Reception Select PTY STBY (standby) if not shown on the display. Select one of the twenty-nine PTY codes. (See page 18.) Finish the setting. Searching your favorite programme To store your favorite programme types Other convenient RDS functions and adjustments Automatic selection of the station when using the number buttons To search your favorite programme type or Changing the display mode while listening to an FM station 2 3 Setting the TA volume level 2 PTY codes Playing a CD Open the control panel. Insert a CD into the loading slot. Close the control panel by hand. CD OPERATIONS To stop play and eject the CD Locating a track or a particular portion on a CD To fast-forward or reverse the track To go to the next or previous tracks To go to a particular track directly Selecting CD playback modes To play back tracks at random (Disc Random Play) 2 To play back tracks repeatedly (Track Repeat Play) 2 Prohibiting disc ejection While pressing CD, press and hold for more than 2 seconds. Playing a CD Text To change the CD Text information manually, select text display mode while playing a CD Text. MP3 INTRODUCTION Precautions when recording MP3 files on a CD-R or CD-RW How are MP3 files recorded and played back? What is MP3? Compatible with ID3v1 (Version 1) MP3 folder/file configuration 02 04 Level 6 03 05 09 MP3 OPERATIONS To stop play and eject the disc To change the display information When TAG DISP is set to TAG OFF When TAG DISP is set to TAG ON (initial setting: see page 33) Locating a file or a particular portion on an MP3 disc To fast-forward or reverse the file To skip to the next or previous files To go to a particular file quickly within the current folder (+10 and 10 buttons) 1 To skip to the next or previous folder 2 To go to a particular folder directly Selecting MP3 playback modes To play back files at random (Folder Random/Disc Random Play) Canceled DISC RNDFLDR RND Canceled SOUND ADJUSTMENTS Selecting preset sound modes (C-EQ: custom equalizer) Press M (MODE) to enter the functions mode. Press EQ (equalizer) while still in the functions mode. Select the sound mode you want. Adjusting the sound Select the item you want to adjust. and Repeat steps Adjust the setting. OTHER MAIN FUNCTIONS Changing the general settings (PSM) Basic Procedure Preferred Setting Mode (PSM) items To select the level meterLEVEL To select the dimmer modeDIMMER To select the telephone mutingTEL To select the scroll modeSCROLL To turn the tag display on or offTAG DISP Detaching the control panel Detaching the control panel Changing the standard plate How to use the cutout plates TROUBLESHOOTING About mistracking: MAINTENANCE Handling discs How to handle discs To keep discs clean To play new discs SPECIFICATIONS AUDIO AMPLIFIER SECTION TUNER SECTION CD PLAYER SECTION GENERAL KD-SC945 Installation/Connection Manual !"#$ / uKU q UN' VOduKU q UN' VOd qOuVOd ULOKF VqOuVOd ULOKF V OO * () 15 A Not included with this unit. ( ) ( ) UD s Y UD s Y Connecting the leads / !"# / / WOU{ d eN qOuWOU{ d eN qOu JVC