Manuals / Nikon / Photography / Digital Camera

Nikon F80D instruction manual Mount Lens, Check the lens type, Detaching the lens

Models: F80D

1 59

Download 59 pages 33.02 Kb

Page 10

2	Mount Lens
	Turn the power switch off and
	mount the lens to the camera
	body.

Check points

Use a D- or G-type AF Nikkor lens to utilise all of this camera’s functions. (See page 34 for Lens Compatibility.)

Make sure to turn the power switch off when attaching/detaching the lens.

When attaching the lens, take care not to press the lens release button.

Avoid direct sunlight when attaching/detaching the lens.

BASIC OPERATION

2.1

2.2

18

Check the lens type.

CPU contacts of CPU	Å CPU Nikkor lens	Í G-type Nikkor lens
lens	other than G-type

ÅCPU Nikkor lens other than G-type (Illustration is D-type Nikkor lens), with aperture ring

ÍG-type Nikkor lens, without aperture ring

Turn the power switch off and mount the lens to the camera body.

•Position lens in the camera’s bayonet mount so that the mounting indexes on lens and camera body are aligned, then twist lens counterclockwise until it locks into place. (Be sure not to touch the lens release button.)

•When the lens is not attached or when a non-CPU Nikkor lens is attached and the power switch is turned on, ƒ--blinks in the LCD panel and viewfinder, and the shutter cannot be released. See page 34 for a non- CPU lens.

2.3

2.4

With CPU Nikkor lens with aperture ring (other than G- type), set the lens aperture to its minimum and lock.

•When CPU Nikkor lens other than G-type is not set to its minimum aperture setting (largest f-number) and the power switch is turned on, ƒEE blinks in the LCD panel and viewfinder and the shutter cannot be released.

•The G-type Nikkor lens has no aperture ring; aperture should be selected from camera body. Unlike other CPU Nikkor lens, aperture does not need to be set to minimum.

Detaching the lens.

2

2

82	35
82
tf m	50
tf m

70

5 8

5 0 1

•Push and hold the lens release button, then turn the lens clockwise.

When camera is left unattended without lens

When you leave the camera unattended

without a lens attached, be sure to attach

the supplied body cap (page 3), or optional body cap BF-1A. (BF-1 body cap cannot be used.)

19

Image 10

Nikon F80D Mount Lens, Check the lens type, Detaching the lens, When camera is left unattended without lens

Contents

Page Nomenclature LCD panel About Nikon Advanced Focusing Screen DisplayLCD Panel/Viewfinder Display Viewfinder DisplayFilm Command DialsCustom Setting ExposureTake trial shots Using your camera correctlyIntroduction Have Nikon spot-check your camera regularlyContents About This Manual Install Batteries and Check BatteryPower Mount Lens Load FilmBasic Operation SituaPositioned as marked inside the battery chamber Turn the power switch off and open the batteryChamber cover by sliding the battery chamber cover Cover, then firmly close the battery chamber coverCheck the lens type When camera is left unattended without lensMount Lens Detaching the lensLoad Film Rotate the focus area selector lock lever to lock Set the focus mode selector to S Single Servo AFSet the AF Area mode selector to g Single Area AF Focus areaShooting characteristics of exposure modes Set the exposure mode select dial to ¡ Auto-Multi 2 ProgamSet the metering system selector to Matrix Metering Hold the camera properly Hold Camera and FocusCamera shake and shutter speed Aperture are shown in 1/2 steps Confirm indications in the viewfinder while lightlyPressing the shutter release button. Shutter speed Confirm that film is completely rewound, thenSpeedlight. The Speedlight starts charging Using Built-In SpeedlightPress the Speedlight lock-release button to release AutomaticallyMetering System ExposureLens Compatibility When a non-CPU lens is attachedTypes of CPU lenses and other usable lenses/accessories Type Nikkor and other CPU Nikkor lensFilm Setting and confirming film speedFilm advance mode Mid-roll rewindFocus mode selector AF Area ModeRotate AF Area mode selector to select AF Area mode AutofocusAutofocus modes Dynamic AF Mode with Closest Subject Priority JFocus AF-Assist Illuminator Focus AreaOptional Speedlight and AF-Assist Illuminator While keeping the focus locked, recompose Confirm focus indicator / and lock focusFocus Lock ShootManual Focus Manual focus using Electronic RangefinderPatterned subject or scene Exposure Metering System Centre-Weighted MeteringMetering systems and characteristics of each are as follows Matrix Metering/3D Matrix Metering¡ Auto-Multi Progam Shooting in Each Exposure ModeRotate the exposure mode select dial to select ¡ Compose picture, focus and shootRotate the exposure mode select dial to select Shutter-Priority AutoSet the aperture by rotating the Sub-Command Dial Rotate the exposure mode select dial to select ££ Aperture-Priority Auto ¢ Manual Electronic analog exposure displayAuto Exposure Lock Exposure Compensation Exposure compensation can be performed in any exposure modeAuto Exposure Bracketing Multiple Exposure Standard compensation value in Multiple exposureRotate the Sub-Command Dial to set the aperture Composeshoot. picture, confirm focus indicator /Rotate the Main-Command Dial to select buLb Multiple Exposure Long Time ExposureComposition Custom Setting Self-Timer OperationMenu/Features of Custom Setting Focus area selection Auto film loading when camera back is closedIllumination for superimposition Closest-subject-priority Dynamic AF in Single Servo AFSelf-timer duration Command Dial functions pagesTime delay for auto meter-switch-off Film rewind pagesTwo-Button Reset Flash Photography3D Multi-Sensor Balanced Fill-Flash Accessory shoeBuilt-in Speedlight Multi-Sensor Balanced Fill-Flash‹ Rear-Curtain Sync Flash Sync Mode Features¤ Slow Sync › Red-Eye ReductionSet the metering system Using the Built-In SpeedlightSet exposure mode and confirm shutter speed and aperture Flash shooting distance range for built-in SpeedlightUsable Lenses with Built-In Speedlight Usable lenses with built-in SpeedlightFlash mode Usable Optional SpeedlightsDepth of field Focus TrackingSetting is complete, push the Select button so Push Mode button to select one of the date displaysPush Adjust button to set the year to Newly adjusted date display appears withoutImprinting date/time Imprinted date/timeMiscellaneous Optional Accessories Camera Care Use fresh batteries at low temperatures TroubleshootingTurn the camera power off when changing batteries Keep batteries out of children’s reachUnderexposure Specifications CPU106 107 108 109 Index Custom Setting Menu 114 115 Nikon Corporation