¢ Manual, Electronic analog exposure display | Nikon F80D guide

Shooting in Each Exposure Mode—continued

•¢: Manual

Enables you to set both shutter speed and aperture manually. With electronic analog exposure display in the viewfinder, you can produce various creative effects by adjusting the exposure. Long Time Exposure (Bulb) can be set in Manual exposure mode.

1 Rotate the exposure mode select dial to select ¢.

NOTE: Minimum aperture with CPU Nikkor lens (except G-type)

2 Set the shutter speed and aperture and confirm by looking at the electronic analog exposure display in the viewfinder.

•Set the shutter speed by rotating the Main-Command Dial and the aperture by rotating the Sub-Command Dial. These functions can be set independently.

•Long Time exposure (Bulb) can be set by setting the shutter speed to buLb (page 65).

•When the shutter speed is set to 1/125 sec., the shutter can be released with the camera back open.

•When the exposure compensation is set, only the electronic analog display changes—selected shutter speed and aperture do not change.

Always set the aperture ring of a CPU Nikkor lens (except G-type) to its minimum (largest f-number). When the lens is not set to its minimum aperture setting, ƒEE blinks in the LCD panel and viewfinder and the shutter locks.

•When a non-CPU Nikkor lens is attached, ƒ--appears in the LCD panel and viewfinder. Set/confirm aperture with the lens aperture ring. Camera’s exposure meter cannot be used. See “Lens Compatibility” on page 34 for details.

c 12: Shutter speed can be set to change with the Sub-Command Dial and aperture with the Main-Command Dial (page 74).

Electronic analog exposure display

The electronic analog display in the viewfinder indicates the difference between the selected exposure (shutter speed and aperture) and the correct exposure. Not available with Long Time Exposure.

The electronic analog exposure display blinks when the subject brightness is beyond the camera’s exposure range.

The following examples show electronic analog exposure display indications:

Correct exposure

–1/2 EV

Over +3 EV

3 Compose picture, focus and shoot.

Exposure

56

57

Image 29

Nikon F80D instruction manual ¢ Manual, Electronic analog exposure display

Contents

Page Nomenclature LCD Panel/Viewfinder Display About Nikon Advanced Focusing Screen DisplayLCD panel Viewfinder Display Custom Setting Command DialsFilm Exposure Introduction Using your camera correctlyTake trial shots Have Nikon spot-check your camera regularly Contents Power Mount Lens Install Batteries and Check BatteryAbout This Manual Load Film Situa Basic Operation Chamber cover by sliding the battery chamber cover Turn the power switch off and open the batteryPositioned as marked inside the battery chamber Cover, then firmly close the battery chamber cover Mount Lens When camera is left unattended without lensCheck the lens type Detaching the lens Load Film Set the AF Area mode selector to g Single Area AF Set the focus mode selector to S Single Servo AFRotate the focus area selector lock lever to lock Focus area Set the metering system selector to Matrix Metering Set the exposure mode select dial to ¡ Auto-Multi 2 ProgamShooting characteristics of exposure modes Camera shake and shutter speed Hold Camera and FocusHold the camera properly Pressing the shutter release button. Shutter speed Confirm indications in the viewfinder while lightlyAperture are shown in 1/2 steps Confirm that film is completely rewound, then Press the Speedlight lock-release button to release Using Built-In SpeedlightSpeedlight. The Speedlight starts charging Automatically Exposure Metering System Types of CPU lenses and other usable lenses/accessories When a non-CPU lens is attachedLens Compatibility Type Nikkor and other CPU Nikkor lens Film advance mode Setting and confirming film speedFilm Mid-roll rewind Rotate AF Area mode selector to select AF Area mode AF Area ModeFocus mode selector Autofocus Focus Dynamic AF Mode with Closest Subject Priority JAutofocus modes Optional Speedlight and AF-Assist Illuminator Focus AreaAF-Assist Illuminator Focus Lock Confirm focus indicator / and lock focusWhile keeping the focus locked, recompose Shoot Patterned subject or scene Manual focus using Electronic RangefinderManual Focus Metering systems and characteristics of each are as follows Centre-Weighted MeteringExposure Metering System Matrix Metering/3D Matrix Metering Rotate the exposure mode select dial to select ¡ Shooting in Each Exposure Mode¡ Auto-Multi Progam Compose picture, focus and shoot Shutter-Priority Auto Rotate the exposure mode select dial to select £ Aperture-Priority Auto Rotate the exposure mode select dial to select £Set the aperture by rotating the Sub-Command Dial Electronic analog exposure display ¢ Manual Auto Exposure Lock Auto Exposure Bracketing Exposure compensation can be performed in any exposure modeExposure Compensation Standard compensation value in Multiple exposure Multiple Exposure Rotate the Main-Command Dial to select buLb Composeshoot. picture, confirm focus indicator /Rotate the Sub-Command Dial to set the aperture Multiple Exposure Long Time Exposure Composition Self-Timer Operation Custom Setting Menu/Features of Custom Setting Illumination for superimposition Auto film loading when camera back is closedFocus area selection Closest-subject-priority Dynamic AF in Single Servo AF Time delay for auto meter-switch-off Command Dial functions pagesSelf-timer duration Film rewind pages Flash Photography Two-Button Reset Built-in Speedlight Accessory shoe3D Multi-Sensor Balanced Fill-Flash Multi-Sensor Balanced Fill-Flash ¤ Slow Sync Flash Sync Mode Features‹ Rear-Curtain Sync › Red-Eye Reduction Set exposure mode and confirm shutter speed and aperture Using the Built-In SpeedlightSet the metering system Flash shooting distance range for built-in Speedlight Usable lenses with built-in Speedlight Usable Lenses with Built-In Speedlight Usable Optional Speedlights Flash mode Focus Tracking Depth of field Push Adjust button to set the year to Push Mode button to select one of the date displaysSetting is complete, push the Select button so Newly adjusted date display appears without Imprinted date/time Imprinting date/time Miscellaneous Optional Accessories Camera Care Turn the camera power off when changing batteries TroubleshootingUse fresh batteries at low temperatures Keep batteries out of children’s reach Underexposure CPU Specifications 106 107 108 109 Index Custom Setting Menu 114 115 Nikon Corporation