Nikon F80D instruction manual Push Mode button to select one of the date displays, Blinking

Adjusting Date and Time and Imprinting Data

•The F80D and F80S allow you to imprint Year/Month/Day, Day/Hour/Minute (24-hour clock), Month/Day/Year or Day/Month/Year on your picture (in any exposure mode).

Data imprint LCD panel	Data imprint LCD panel
ADJUST button	ADJUST button
F80D	F80S

SELECT button	SELECT button
MODE button	MODE button
	Shooting data imprint dial

•Adjusting date and time (Example: year 2000, April 21, 15:30; shows the operation with F80D; same operation with F80S)

1 Push MODE button to select one of the date displays.

• Each time you push the MODE button the display changes as follows:

Year/Month/Day Day/Hour/Minute No imprint

Day/Month/Year Month/Day/Year

•To set date choose display other than Day/Hour/Minute. With Day/Hour/Minute display, only time can be set.

90

2 Push SELECT button so year section starts blinking.

•Each time you push the SELECT button the blinking section moves in the order of year, month and day. ’ indicates the year section (last two digits) and M indicates the month section. (M is not imprinted on the picture.)

3 Push ADJUST button to set the year to “00”.

•Each time you push the ADJUST button the year section changes as follows (between 1998 to 2049):

•To change the numerical indication rapidly, hold the ADJUST button down for more than 1 sec.

4	Set the month and day following steps 2 and 3. When
	the setting is complete, push the SELECT button so
	the newly adjusted date display appears without
	DataBack
	blinking.

•Push the SELECT button until the date display stops blinking. When the data imprint indicator — appears in the data imprint LCD panel,

date setting is complete. 91