Power Up | When the Vanguard 342 power cord is plugged into the power supply outlet, you will |
| ||
Sequence | see the following power up sequence: |
|
| |
|
|
|
|
|
| Stage | when... | ...this indicates |
|
|
|
|
|
|
| 1 | Power (PWR) LED turns on | Vanguard is receiving power. |
|
|
| (GREEN) |
|
|
|
|
|
|
|
| 2 | PWR LED remains on and the | Diagnostics are starting. |
|
|
| Status (STAT) LED blinks |
|
|
|
| (RED). |
|
|
|
|
|
|
|
| 3 | PWR LED blinks. | Diagnostics are executed. |
|
|
|
|
|
|
| 4 | PWR LED remains on and the | Indicates software is being |
|
|
| STAT LED blinks. | downloaded from FLASH. |
|
|
|
|
|
|
| 5 | PWR LED blinks. | Software is initializing your system |
|
|
|
| configuration. |
|
|
|
|
|
|
| 6 | PWR LED remains on. | Your system is running. |
|
Detailed FT1/FE1 |
|
|
|
|
|
|
|
| |
The FT1/FE1 daughtercards have one LED located on the rear panel. Software |
| |||
LED | controls the LED and indicates the following when ON or OFF: |
| ||
•ON - Alarm condition data path is disrupted, refer to the FT1/FE1 interface statistics for more information on the problem.
•OFF - Normal operation exists.
