Configuring the Serial Interface
Setting the Interface Options
Introduction | This section provides instruction for setting the Interface Options parameter. |
V.24 Interface Type Use this procedure to set the Interface Options parameter for V.24 interface type:
Step | Action | Result/Description |
|
|
|
1 | From the Control Terminal Port | The Port record appears. |
| Main menu, select Configure |
|
| Port. |
|
|
|
|
2 | In the Port Number parameter, | Port 3 is selected. |
| type 3, then press ENTER. |
|
|
|
|
3 | In the Port Type parameter, type | This defines Port 3 type as FRI. |
| FRI, then press ENTER |
|
|
|
|
4 | In the Interface Type parameter, | The interface is set to V.24 |
| type V.24, and then press |
|
| ENTER. |
|
|
|
|
5 | In the Interface Options | The Range and Default appears: |
| parameter, type a ?, and then | Range = RI, TM |
| press ENTER. | Default = RI |
|
| |
|
| Specify the Pin 22 option: |
|
| RI - V.24 uses Pin 22 for Ring |
|
| Indicator output signal |
|
| TM - V.24 uses Pin 22 for Test |
|
| Mode input signal |
|
|
|
6 | Select either RI or TM for the | When RI is selected, the output signal |
| Interface Option. | is Ring Indicator. |
|
| When TM is selected, the input signal |
|
| is Test Mode. |
|
|
|
Installation and Replacement |
