Vanguard Managed Solutions 342 Port Characteristics and Cabling, Application Specific

					Cabling the Vanguard 342
	Port Characteristics and Cabling
Introduction
			This section describes the port characteristics and cables required to connect to the
			Vanguard 342.
Port
			This table lists the port characteristics, connector and cable requirements:
Characteristics and
Cable
Requirements
Port	Connector		Interface	Cable Required	Speed	DCE/DTE
				(Application Specific)
1	DB25	DIM Site		DB25-to-DB25 Cable	V.11, V.35 and	Selectable
		Daughtercard			V.36 - Max. sync
		V.11, V.24, V.35,			speed 2 mpbs
		V.36			V.24 - Max. sync
					speed 80 kpbs, Max
					async speed 115.2
					kbps
	RJ48S	DSU		DSU Telco Cable (Part	DSU -56 kbps	DTE DSU
		Daughtercard		Number) shipped with
				DSU Daughtercard
	RJ11	FXS/FXO		RJ11-to-RJ11 Cable	N/A	N/A
		Daughtercard
	RJ45	ISDN U or S/T		RJ45-to-RJ45 Cable	Either 56 or 64 kbps	N/A
		Daughtercard			for each B Channel
					and 9.6 kbps for the
					D Channel
	RJ11	4 Port FXS /FXO		RJ11-to-RJ11 Cable	N/A	N/A
		Daughtercard
	RJ11	Dual FXS		RJ11-to-RJ11 Cable	N/A	N/A
		Daughtercard
	RJ48C	FT1		RJ48-to-RJ48 Twisted	full or fractional T1	N/A
		Daughtercard		Pair Cable	speeds
	RJ48C	FE1		RJ48-to-RJ48 Twisted	full or fractional E1	N/A
		Daughtercard		Pair Cable	speeds
	BNC Pair	FE1		2 BNC-to-BNC 75ohm	Full or fractional E1	N/A
		Daughtercard		Coax Cable	speeds
	RJ45	Dual E&M		RJ45-to-RJ45 Cable	N/A	N/A
		Daughtercard
	RJ11	V.34, V.90		RJ11-to-RJ11 Cable	N/A	N/A
		Daughtercard
	RJ45	G.SHDSL		RJ45-to-RJ45 Cable	N/A	N/A

Installation and Replacement 3-13