DISP*1, Tag, Display, Area, AUX Adjust | JVC GET0564-010A, KD-R33

SETTINGS

Menu items

Selectable settings

Initial: Underlined

BEEP

• BEEP ON: Activates the keypress tone.

Sound adjustments

AUDIO

• BEEP OFF: Deactivates the keypress tone.

AMP GAIN*5

• HIGH POWER: VOLUME 00 – VOLUME 50

Indication (For)

BASS

TREBLE

LOUD

than 50 W to prevent damaging the speaker.)

Preset values

• LOW POWER: VOLUME 00 – VOLUME 30 (Select if the maximum power of each speaker is less

USER (Flat sound)

OFF

SELECT

AM*6

• AM OFF: Disable “AM” in source selection.

• AM ON: Enable “AM” in source selection.

ROCK (Rock or disco music)

+03

+01

SRC

AUX IN*7

• AUX OFF: Disable “AUX IN” in source selection.

CLASSIC (Classical music)

+01

–02

OFF

• AUX ON: Enable “AUX IN” in source selection.

Select “EQ”

The volume level automatically changes to “VOLUME 30” if you change to “LOW POWER” with the volume level is set

POPS (Light music)

+04

+01

OFF

higher than “VOLUME 30.”

HIP HOP (Funk or rap music)

+02

Displayed only when any source other than “AM” is selected.

JAZZ (Jazz music)

+02

+03

OFF

Displayed only when any source other than “AUX IN” is selected.

TROUBLESHOOTING

* You can change “USER” settings and store as your own sound mode (see below).

Storing your own sound mode

Symptoms

Remedies/Causes

Select “USER” for “EQ”.

• Sound cannot be heard from the speakers.

• Adjust the volume to the optimum level.

1 Select a tone.

General

• Check the cords and connections.

BASS Ô TREBLE

• This unit does not work at all.

Reset the unit.

2 Adjust the Level.

• “AUX IN” cannot be selected.

Check the “SRC SELECT” = “AUX IN” setting (see “Menu

While “USER”

This mode will be canceled if

–06 to +06

operations”).

is shown on

no operation is done for about

3 Repeat 1and 2for the

• SSM automatic presetting does not work.

Store stations manually.

other tone if necessary.

the display...

30 seconds.

FM/AM

• Static noise while listening to the radio.

Connect the antenna firmly.

Title assignment

• “AM” cannot be selected.

Check the “SRC SELECT” = “AM” setting (see “Menu

You can assign titles to 30 station frequencies (FM and AM) using 8 characters (maximum) for each title.

operations”).

• Disc cannot be played back.

Insert the disc correctly.

Select “FM” or “AM.”

Move to the next (or previous) character

• CD-R/CD-RW cannot be played back.

• Insert a finalized CD-R/CD-RW.

position.

• Tracks on the CD-R/CD-RW cannot be

• Finalize the CD-R/CD-RW with the component which you used for

Show the title entry screen.

skipped.

recording.

Repeat steps 1 and 2 until you finish entering

playback

• Disc can be neither played back nor

•

Unlock the disc.

ejected.

• Eject the disc forcibly.

the title.

Disc

• Disc sound is sometimes interrupted.

• Stop playback while driving on rough roads.

•

Change the disc.

Select a character.

Finish the procedure.

• Check the cords and connections.

• “NO DISC” appears on the display.

Insert a playable disc into the loading slot.

• “PLEASE” and “EJECT” appear alternately

Press 0, then insert a disc correctly.

on the display.

• Disc cannot be played back.

• Use a disc with MP3/WMA tracks recorded in a format compliant

To erase the entire title

with ISO 9660 Level 1, Level 2, Romeo, or Joliet.

In step 2 above...

• Add the extension code <.mp3> or <.wma> to the file names.

playback

•

Noise is generated.

Skip to another track or change the disc. (Do not add the extension

code <.mp3> or <.wma> to non-MP3 or WMA tracks.)

Menu operations

• A longer readout time is required

Do not use too many hierarchical levels and folders.

• To return to the previous menu, press

MP3/WMA

(“READING” keeps flashing on the display).

have intended.

Playback order is determined when the files are recorded.

Repeat step 2 if necessary.

• Tracks are not played back in the order you

BACK.

• The elapsed playing time is not correct.

This sometimes occurs during playback. This is caused by how the

tracks are recorded on the disc.

Menu items

Selectable settings

Initial: Underlined

• The correct characters are not displayed

This unit can only display alphabets (upper case), numbers, and a

(e.g. album name).

limited number of symbols.

DEMO

• DEMO ON: The display demonstration will be activated automatically if no operation is done for

• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United

about 20 seconds.

•

DEMO OFF: Cancels.

States and/or other countries.

CLOCK

• CLOCK ON: The clock time is shown on the display at all times when the power is turned off.

SPECIFICATIONS

DISP*1

• CLOCK OFF: Cancels; pressing DISP will show the clock time for about 5 seconds when the power is

turned off.

Audio amplifier section

CD player section

CLOCK SET

: Adjust the hour, then the minute. [Initial: 1:00]

Type:

Compact disc player

Select a preset sound mode suitable to the music genre.

Power Output:

Signal Detection System:

Non-contact optical pickup

USER, ROCK, CLASSIC, POPS, HIP HOP, JAZZ

20 W RMS × 4 Channels at 4 Ω and

(semiconductor laser)

DIMMER

• DIMMER ON: Dims the display and button illumination.

≤ 1% THD+N

Number of channels:

2 channels (stereo)

Signal to Noise Ratio:

•

DIMMER OFF: Cancels.

Frequency Response:

5 Hz to 20 000 Hz

80 dBA (reference: 1 W into 4 Ω)

Dynamic Range:

93 dB

DISPLAY

SCROLL*2

• SCROLL ONCE: Scrolls the displayed information once.

Tone Control Range:

Bass: ±12 dB at 100 Hz

MP3 Decoding Format:

MPEG1/2 Audio Layer 3

• SCROLL AUTO: Repeats scrolling (at 5-second intervals).

Load Impedance:

4 Ω (4 Ω to 8 Ω allowance)

Signal-to-Noise Ratio:

98 dB

• SCROLL OFF: Cancels.

Wow and Flutter:

Less than measurable limit

Pressing DISP for more than one second can scroll the display regardless of the setting.

Treble: ±12 dB at 10 kHz

Max. Bit Rate: 320 kbps

TAG

• TAG ON: Shows the Tag information while playing MP3/WMA tracks.

Frequency Response:

40 Hz to 20 000 Hz

WMA (Windows Media® Audio) Decoding Format:

DISPLAY

•

TAG OFF: Cancels.

Line-Out Level/Impedance: 2.5 V/20 kΩ load (full scale)

Max. Bit Rate: 192 kbps

AREA

• AREA US: When using in North/Central/South America. AM/FM intervals are set to 10 kHz/200 kHz.

Output Impedance:

1 kΩ

• AREA EU: When using in any other areas. AM/FM intervals are set to 9 kHz/50 kHz (100 kHz during

Tuner section

General

auto search).

Power Requirement:

Operating Voltage: DC 14.4 V

• AREA SA: When using in South American countries where FM interval is 100 kHz. AM interval is set

Frequency Range:

(11 V to 16 V allowance)

to 10 kHz.

TUNER

FM:

87.5 MHz to 107.9 MHz

Grounding System:

Negative ground

MONO*3

• MONO ON: Activate monaural mode to improve FM reception, but stereo effect will be lost.

(with channel interval set to 100 kHz or 200 kHz)

Allowable Operating Temperature:

• MONO OFF: Restore the stereo effect.

87.5 MHz to 108.0 MHz

0°C to +40°C (32°F to 104°F)

(with channel interval set to 50 kHz)

Dimensions (W × H × D):

IF BAND

• AUTO: Increases the tuner selectivity to reduce interference noises between adjacent stations.

AM:

530 kHz to 1 710 kHz

Installation Size (approx.):

(Stereo effect may be lost.)

(with channel interval set to 10 kHz)

182 mm × 52 mm × 160 mm

• WIDE: Subject to interference noises from adjacent stations, but sound quality will not be

531 kHz to 1 602 kHz

(7-3/16” × 2-1/16” × 6-5/16”)

degraded and the stereo effect will remain.

(with channel interval set to 9 kHz)

Panel Size (approx.):

FADER*4

R06 – F06: Adjust the front and rear speaker output balance. [Initial: 00]

188 mm × 58 mm × 6 mm

[FM Tuner]

(7-7/16” × 2-5/16” × 1/4”)

BALANCE

L06 – R06: Adjust the left and right speaker output balance. [Initial: 00]

Usable Sensitivity: 11.3 dBf (1.0 μV/75 Ω)

Mass (approx.):

AUDIO

LOUD

•

LOUD OFF: Cancels.

50 dB Quieting Sensitivity: 16.3 dBf (1.8 μV/75 Ω)

1.3 kg (2.9 lbs) (excluding accessories)

• LOUD ON: Boost low and high frequencies to produce a well-balanced sound at a low volume level.

Alternate Channel Selectivity (400 kHz): 65 dB

Design and specifications are subject to change without

AUX ADJUST

AUX ADJ 00 – AUX ADJ 05: Adjust the auxiliary input level to avoid the sudden increase of the

Frequency Response: 40 Hz to 15 000 Hz

notice.

output level when changing the source to external component connected to the AUX input jack on

Stereo Separation: 35 dB

the control panel.

[AM Tuner]

Having TROUBLE with operation?

If the power supply is not interrupted by turning off the ignition key of your car, it is recommended to select “CLOCK

Sensitivity/Selectivity:

20 μV/35 dB

Please reset your unit

OFF” to save the car’s battery.

If a kit is necessary for your car, consult your telephone

Still having trouble??

Some characters or symbols will not be shown correctly (or will be blanked) on the display.

Displayed only when the source is “FM.”

directory for the nearest car audio speciality shop.

Call 1-800-252-5722 (USA ONLY)

If you are using a two-speaker system, set the fader level to “00.”

http://www.jvc.com

3 – EN

INSTRUCTIONS