Listening to the radio

~

 

Ÿ

 

] “FM” or “AM”

“ST” lights up when receiving an FM stereo broadcast with

 

 

 

 

sufficient signal strength.

Listening to the disc

~ Ÿ

] Turn on the power.

All tracks will be played repeatedly until you change the source or eject the disc.

Manual search

“M” flashes, then press the button repeatedly.

[Hold]

When an FM stereo broadcast is hard to receive

1

[Hold]

2

]<TUNER> ] <MONO> ] <MONO ON> Reception improves, but stereo effect will be lost.

To restore the stereo effect, repeat the same procedure to select <MONO OFF>.
Automatic presetting (FM)—
SSM (Strong-station Sequential Memory)

You can preset up to 18 stations for FM.

While listening to a station...

1

[Hold]

2

]<TUNER> ] <SSM> ] <SSM 01 – 06> / <SSM 07 – 12> / <SSM 13 – 18>

“SSM” flashes and local stations with the strongest signals are searched and stored automatically.

To preset another 6 stations, repeat the above procedure by selecting one of the other six SSM setting ranges.

Manual presetting (FM/AM)

You can preset up to 18 stations for FM and 6 stations for AM.

Ex.: Storing FM station of 92.50 MHz into preset number “04.”

1

]“92.50MHz”

Selecting a preset station

1

or 2

Assigning title to a station

You can assign titles to 30 station frequencies (FM and AM) using 8 characters (maximum) for each title.

1

]“FM” or “AM”

2

[Hold]

]Show the title entry screen.

3

]Selects a character.

4

]Move to the next (or previous) character position.

5Repeat steps 3 and 4 until you finish entering the title.

6

To erase the entire title, press and hold DISP after step 2, then press the control dial.

Available characters

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

S

T

U

V

W

X

Y

Z

0

1

2

3

4

5

6

7

8

9

/

<

>

 

 

Space

 

 

Changing the display informationStation name * = Frequency =

Clock = (back to the beginning)

* If no title is assigned to a station, “NO NAME” appears

Stopping playback and ejecting the disc

“NO DISC” appears.

Press /SOURCE to listen to another playback source.

Prohibiting disc ejection

[Hold]

To cancel the prohibition, repeat the same

procedure.

Caution on volume setting:

Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level.

Selects folder of the MP3/

WMA

Selects track

 

Fast-forwards or reverses

[Hold]

the track

 

Selecting a track/folder

1

2

For MP3/WMA discs, select the desired folder, then the desired track by repeating step 2.

• To return to the previous menu, press BACK.

Selecting the playback modes

You can use only one of the following playback modes at a time.

1

2

]“REPEAT” j “RANDOM”

3

REPEAT

 

TRACK RPT

: Repeats current track

FOLDER RPT

: Repeats current folder

RANDOM

 

FOLDER RND

: Randomly plays all tracks of

 

current folder, then tracks of

 

next folders

ALL RND

: Randomly plays all tracks

To cancel repeat play or random play, select “RPT OFF” or “RND OFF.”

Changing the display information

Disc title/Album name/performer (folder name)*

=Track title (file name)* = Current track number with the elapsed playing time = Current track number with the clock time = (back to the beginning)

* If the current disc is an audio CD, “NO NAME” appears. If an MP3/WMA file does not have Tag information or <TAG DISPLAY> is set to <TAG OFF> (see page 3), folder name and file name appear.

Using the remote controller

5 U/D : Selects folder of the MP3/

WMA

2 R/F 3 : Selects track

2 R/F 3 : Fast-forwards or reverses the [Hold] track

2

[Hold]

“PRESET MODE” flashes.

3

]Selects preset number “04.”

“P04” flashes and “MEMORY” appears.

for a few seconds.

Using the remote controller

5 U/D : Changes the preset stations

2 R/F 3 : Searches for stations

Listening to the USB device

This unit can play MP3/WMA tracks stored in a USB device.

~

Ÿ

USB input jack

USB memory

] Turn on the power.

Listening to the external components

All tracks will be played repeatedly until you change the source or detach the USB device.

You can connect an external component to the AUX

 

(auxiliary) input jack on the control panel.

 

• Make sure <AUX ON> is selected for the

3.5 mm (3/16”) stereo mini

<SRC SELECT> = <AUX IN> setting on page 3.

1

plug (not supplied)

 

] “AUX IN”

 

 

2 Turn on the connected component and start

 

Portable audio player,

playing the source.

 

etc.

 

 

 

If a USB device has been attached...

Pressing/SOURCE turns on the power and playback starts from where it has been stopped previously.

If a different USB device is currently attached, playback starts from the beginning.

Stopping playback and detaching the USB device

Straightly pull it out from the unit.

“NO USB” appears. Press /SOURCE to listen to another playback source.

You can operate the USB device in the same way you operate the files on a disc.

Caution on volume setting:

USB devices produce very little noise compared with other sources. Lower the volume before playing

a USB to avoid damaging the speakers by sudden increase of the output level.

Cautions:

Avoid using the USB device if it might hinder your safety driving.

Do not pull out and attach the USB device repeatedly while “READING” is shown on the display.

Do not start the car engine if a USB device is connected.

This unit may not be able to play the files depending on the type of USB device.

Operation and power supply may not work as intended for some USB devices.

You cannot connect a computer to the USB input terminal of the unit.

Make sure all important data has been backed up to avoid losing the data.

Do not leave a USB device in the car, expose to direct sunlight, or high temperature to avoid deformation or cause damages to the device.

Some USB devices may not work immediately after attaching USB device or turn on the power.

For more details about USB operations, see page 4.

2 – EN