GENERAL
Power Requirement:

Maintenance

How to clean the connectors

Wipe the connectors with a cotton swab or cloth moistened with alcohol.

Connectors

Moisture condensation

Moisture may condense on the lens inside the unit. Eject the disc and leave the unit turned on for a few hours until the moisture has evaporated.

To keep discs clean

Wipe in a straight line from center of disc to edge. Do not use liquid cleaners, thinners, or benzene.

Specifications

AUDIO AMPLIFIER SECTIONPower Output:

20 W RMS × 4 Channels at 4 Ω and ≤ 1% THD+N

Signal-to-Noise Ratio:

80 dBA (reference: 1 W into 4 Ω)

Load Impedance:

4 Ω (4 Ω to 8 Ω allowance)

Tone Control Range:

 

Bass:

±12 dB (60 Hz, 80 Hz, 100 Hz, 200 Hz)

 

Q1.0, Q1.25, Q1.5, Q2.0

Middle:

±12 dB (0.5 kHz, 1.0 kHz, 1.5 kHz,

 

2.5 kHz)

 

 

Q0.75, Q1.0, Q1.25

Treble:

±12 dB (10.0 kHz, 12.5 kHz, 15.0 kHz,

 

17.5 kHz)

 

 

Q (Fixed)

 

Frequency Response: 40 Hz to 20 000 Hz Line-Out Level/Impedance:

2.5V/20 kΩ load (full scale)

Subwoofer-Out Level/Impedance:

2.5V/20 kΩ load (full scale)

Output Impedance: 1 kΩ

Other Terminal:

USB input jack, AUX (auxiliary)

 

 

input jack, Antenna input

TUNER SECTION

 

Frequency Range:

 

FM:

87.5 MHz to 107.9 MHz

 

(with channel interval set to 100 kHz or

 

200 kHz)

 

 

87.5 MHz to 108.0 MHz

 

(with channel interval set to 50 kHz)

AM:

530 kHz to 1 710 kHz

 

(with channel interval set to 10 kHz)

531 kHz to 1 602 kHz

(with channel interval set to 9 kHz)

[FM Tuner]

Usable Sensitivity: 9.3 dBf (0.8 μV/75 Ω)

50 dB Quieting Sensitivity: 16.3 dBf (1.8 μV/75 Ω)

Alternate Channel Selectivity (400 kHz): 65 dB

Frequency Response: 40 Hz to 15 000 Hz

Stereo Separation: 40 dB

[AM Tuner]

Sensitivity/Selectivity: 20 μV/40 dB

To play new discs

Remove any rough areas from the inner and outer edges of the disc.

Do not use the following discs:

•Single CD—8 cm (3-3/16”) disc

•Warped disc

•Disc with sticker and sticker residue

•Disc with stick-on label

•Unusual shape disc

•C-thru Disc (semi-transparent disc)

•Disc with transparent or semi-transparent parts on its recording area

CD PLAYER SECTION

 

Type:

Compact disc player

Signal Detection System: Non-contact optical pickup

 

(semiconductor laser)

Number of channels:

2 channels (stereo)

Frequency Response:

5 Hz to 20 000 Hz

Dynamic Range:

96 dB

Signal-to-Noise Ratio:

98 dB

Wow and Flutter:

Less than measurable limit

MP3 Decoding Format:

MPEG1/2 Audio Layer 3

 

Max. Bit Rate: 320 kbps

WMA (Windows Media® Audio) Decoding Format:

 

Max. Bit Rate: 320 kbps

USB SECTION

 

 

 

USB Standard:

USB 1.1, USB 2.0

Data Transfer Rate (Full Speed): Max. 12 Mbps

Compatible Device:

Mass storage class

Compatible File System:

FAT 32/16/12

Playable Audio Format:

MP3/WMA

Max. Current:

DC 5 V

 

500 mA

 

Operating Voltage: DC 14.4 V (11 V to 16 V allowance)

Grounding System: Negative ground Allowable Operating Temperature:

0°C to +40°C (32°F to 104°F)

Dimensions (W × H × D): Installation Size (approx.):

182 mm × 52 mm × 160 mm (7-3/16” × 2-1/16” × 6-5/16”)

Panel Size (approx.):

188 mm × 58 mm × 6 mm (7-7/16” × 2-5/16” × 1/4”)

Mass (approx.): 1.3 kg (2.9 lbs) (excluding accessories)

Design and specifications are subject to change without notice.

If a kit is necessary for your car, consult your telephone directory for the nearest car audio speciality shop.

Preparation

You need the installation kits which corresponds to your car.

• Mark all the check boxes () to make sure you have follow the instructions and the listed parts.

Check the battery system in your car
12 V DC, NEGATIVE ground
Prepare this before installation
Parts list for installation and connection

 

AControl panel

 

BSleeve

CTrim plate

 

DPower cord

EHandles

 

FRemote controller / Battery

Troubleshooting

• The fuse blows.

] Are the red and black leads connected correctly?

• Power cannot be turned on.

] Is the yellow lead connected?

• No sound from the speakers.

] Is the speaker output lead short-circuited?

• Sound is distorted.

] Is the speaker output lead grounded?

] Are the “–” terminals of L and R speakers grounded in common?

• Noise interfere with sounds.

] Is the rear ground terminal connected to the car’s chassis using shorter and thicker cords?

• This unit becomes hot.

] Is the speaker output lead grounded?

] Are the “–” terminals of L and R speakers grounded in common?

• This unit does not work at all.

Having TROUBLE with operation?

Please reset your unit

Still having trouble??

Call 1-800-252-5722 (USA ONLY)

http://www.jvc.com

] Have you reset your unit?

5 – EN