3 Press 2/3to select the desired setting.
Each time you press the button, the Remote Switch Mode changes as follows:
MODE1: Input alternates between “VIDEO A” and “VIDEO B” when controlled from the external control unit.
MODE2: Input alternates between “VIDEO A” and “RGB B/COMPO.” when controlled from the external control unit.
MODE3: Input alternates between “VIDEO A” and “RGB A” when controlled from the external control unit.
MODE4: Input alternates between “VIDEO B” and “RGB B/COMPO.” when controlled from the external control unit.
MODE5: Input alternates between “VIDEO B” and “RGB A” when controlled from the external control unit.
MODE6: Input alternates between “RGB B/COMPO.” and “RGB A” when controlled from the external control unit.
4 Press MENU/EXIT (or MENU on the Monitor) once to exit from the menu operations.
Setting the High-Definition Signal Types
You can select one of the
•Without setting “RGB/COMPO.” correctly, you cannot show any picture though you select the COMPONENT input (see page 23).
1 On the remote control:
Press MENU/EXIT while holding VOLUME – to display the Setup Menu.
On the Monitor:
Press MENU while holding 2to display the Setup Menu.
Cursor (3) | S E T - U P M E N U | 1 / 2 |
|
| ||||||
S T A T U S D I S P L A Y | : O F F | |||||||||
| ||||||||||
| C O N T R O L L O C K | : O F F | ||||||||
| R E M O T E S W I T C H | : M O D E 1 | ||||||||
| H D S I G N A L M O D E | : 1 0 8 0 i | ||||||||
| W H I T E B A L A N C E |
|
|
|
| |||||
| A D J U S T : |
|
|
| S E L E C T : |
| E X I T : |
|
| |
|
|
|
| M E N U |
| |||||
|
|
|
|
|
|
|
|
|
| |
2 Press 5/to move the cursor (3) to “HD SIGNAL MODE.”
•The Setup Menu consists of two pages. If you keep pressing 5/, you can move to the other page from the current page.
3 Press 2/3 to select the desired setting.
Each time you press the button, the HD signal type alternates between “1080i” and “1035i.”
•You can select either “1080i” and “1035i” according to the HD signal you input — whichever gives you proportionally shaped pictures.
4 Press MENU/EXIT (or MENU on the Monitor) once to exit from the menu operations.
Using the Pixel Shift Function
This function periodically shift the position (pixels) of the displayed picture on the screen so that you can avoid the screen from being burned in.
1 On the remote control:
Press MENU/EXIT while holding VOLUME – to display the Setup Menu.
On the Monitor:
Press MENU while holding 2to display the Setup Menu.
Cursor (3) | S E T - U P M E N U | 1 / 2 |
|
| |||||
C O N T R O L L O C K | : O F F |
| |||||||
| S T A T U S D I S P L A Y | : O F F |
| ||||||
| R E M O T E S W I T C H | : M O D E 1 |
| ||||||
| H D S I G N A L M O D E | : 1 0 8 0 i |
| ||||||
| W H I T E B A L A N C E |
|
|
|
| ||||
| A D J U S T : |
|
|
| S E L E C T : |
| E X I T : |
|
|
|
|
|
| M E N U |
| ||||
|
|
|
|
|
|
|
|
|
|
2 Press 5/to move the cursor (3) to “PIXEL SHIFT” (on the second page).
•The Setup Menu consists of two pages. If you keep pressing 5/, you can move to the other page from the current page.
| S E T - U P M E N U | 2 / 2 |
|
| P I X E L S H I F T | : O N |
|
| P O W E R S A V E | : O N |
|
| C O L O R - R E V E R S E | : O N |
|
| R E F R E S H | : O N |
|
| r e s e t |
|
|
| a l l r e s e t |
|
|
| H O U R M E T E R x 1 0 0 h : 0 0 1 |
| |
| M O D E L N A M E | : G M - P 4 2 1 U |
|
|
|
|
|
3 Press 2/3 to select the desired setting.
Each time you press the button, the Pixel Shift function alternates between “ON” and “OFF.”
To cancel the Pixel Shift function, select “OFF.”
4 Press MENU/EXIT (or MENU on the Monitor) once to exit from the menu operations.
27