Parts Identification (Continued)

Monitor: Rear Views

 

 

 

7

 

 

 

 

 

SPEAKER OUT

SPEAKER OUT

 

 

 

 

R

L

 

 

 

(

9

( 9

1

2

3

4

5

6

AUDIO

 

 

OUT

 

 

 

 

 

MAKE

L

 

 

 

 

 

 

 

 

 

IN

RS-232C

WIRED

R

 

 

 

RGB A

REMOTE

AUDIO

OPTION

AC IN

POWER

 

1RGB A input terminals (page 11)

•D-sub, 15 pin

Connect to the video output terminal of a personal computer.

•AUDIO IN (stereo mini jack)

Connect to the audio output terminal of a personal computer.

2REMOTE terminals (pages 11 and 13)

•RS-232C (D-sub, 9 pin)

Connect to the RS-232C terminal of a personal computer. For the control method using this terminal, consult an authorized JVC dealer.

•MAKE terminal (mini DIN 4pin)

Connect an external control unit. (See page 13.)

•WIRED terminal (stereo mini jack)

Connect a wired remote control unit to this terminal.

Note:

•When the above three terminals are used at the same time, transmitted commands through the MAKE terminal have priority over those through the other terminals.

3AUDIO OUT terminals (pin jack) (page 11)

Connect to the audio input terminals of external equipment such as an amplifier.

4OPTION terminal (page 13)

Connect the power cord of the Cooling Fan Unit (not supplied) when installing the Monitor vertically.

5AC IN terminal (page 11)

Connect the supplied power cord to this terminal.

6POWER switch (page 14)

Setting this switch to ON will put the Monitor into standby mode, allowing you to turn on and off the power using the POWER button either on the remote control or on the Monitor.

7SPEAKER OUT L/R terminals (page 11)

Connect external speakers.

6