Parts Identification

Remote Control

1

2

3

4

DISPLAY

ASPECT

POWER

VIDEO A

VIDEO B

COMPO. RGB A

 

 

RGB B

MUTING

 

VOLUME

6

7

8

9

p

MENU/EXIT

5

RM-C576 REMOTE CONTROL UNIT

1Remote control cable jack (page 11)

Connect the remote control cable (not supplied) when using this remote control as a wired remote control.

2DISPLAY button (page 14)

Use this button to display the input terminal, color system (for VIDEO A or VIDEO B input), scan system (for COMPONENT input) and horizontal/vertical frequency (for RGB A and RGB B input).

Pressing the button again will make the display disappear.

3VIDEO A, VIDEO B, COMPO./RGB B and RGB A buttons (page 14)

Use these buttons to switch between inputs.

To select the COMPONENT or RGB B input, you have to set “RGB/COMPO.” correctly on the menu (see page 23).

4MUTING button (page 14)

Use this button to turn off the volume immediately. Pressing the button again will resume the previous volume level.

5MENU/EXIT button

Use this button to display or erase menus.

While a sub-menu is displayed, pressing this button will move you one screen back to the preceding menu.

6Remote signal transmission window

7ASPECT button (page 15)

Use this button to switch between aspect ratios. Each time you press the button, the aspect ratio changes as follows:

REGULAR FULL

PANORAMIC ZOOM

8POWER button (page 14)

Use this button to turn on/off the power.

9VOLUME + / – buttons (page 14)

Use these buttons to adjust the volume level.

•The VOLUME – button can be also used to display the Setup Menu (see page 25).

p2/ 3/ 5/ ￿buttons

Use these buttons to select menu items or make adjustments.

4