JVC GM-V42E manual Monitor Front View

Monitor: Front View

			ENGLISH
1	2
			MENU INPUT
		MENU INPUT
Bottom View	3	4 5	6

1Remote sensor/power lamp

Point the front end of the wireless remote control toward here.

When the Monitor is turned on, the power lamp glows green. It glows orange in standby mode.

2Self-diagnostic lamps (page 39)

These lamps light/flash if something abnormal occurs with the Monitor.

32 / 3 / 5 / ∞ buttons

Use these buttons to select menu items and to make adjustments.

•When no menu is displayed, you can use the 2 / 3 buttons to adjust the volume level.

4MENU button

Use this button to display or erase menus.

While a sub-menu is displayed, pressing this button will move you one screen back to the preceding menu.

5INPUT button (page 14)

Use this button to switch between inputs.

To select the COMPONENT or RGB B input, you have to set “RGB/COMPO.” correctly on the menu (see page 22).

•Only for GM-V42PCE, GM-V42PCEG and GM-V42PCEB: Only RGB A input can be used.

To reproduce images through the other inputs, you need to install video input unit (IF-C42P1G), which is separately purchased.

6 button (page 14)

Use this button to turn on and off the Monitor.

5