Note:

* GM-V42PCE, GM-V42PCEG and GM-V42PCEB do not have the following input terminals— VIDEO A, VIDEO B, and COMPONENT/RGB B. To input video, S-video, and component signals, you need to install video input unit (IF-C42P1G), which is separately purchased.

9

p

q

AUDIO

VIDEO

AUDIO

VIDEO

 

AUDIO

 

 

VIDEO

L/MONO

 

L/MONO

 

 

L/MONO

 

 

 

R IN

OUT

R

IN

Y/C IN

R

Y/G

Pb/B

Pr/R HD/Cs VD

VIDEO A

 

 

VIDEO B

 

 

COMPONENT/RGB B

ENGLISH

9 VIDEO A terminals (page 12)

q COMPONENT/RGB B input terminals (page 12)

AUDIO (L/MONO, R) input terminals (pin jack)

AUDIO (L/MONO, R) input terminals (pin jack)

Connect these terminals to the audio input terminals of a

Connect these terminals to the audio output terminals of

VCR, etc.

the other equipment.

VIDEO IN terminal (BNC)

G, B, R, HD/Cs, VD (VIDEO) input terminals (BNC)

Connect this terminal to the video output terminal of a

Connect these terminals to the following output

VCR, etc.

terminals of a personal computer or other equipment:

VIDEO OUT terminal (BNC)

– Analog RGB signal output terminals

Connect this terminal to the video input terminal of

– Horizontal sync (HD) signal or composite (Cs) signal

another Monitor.

output terminal

Note:

– Vertical sync (VD) signal output terminal

Notes:

• Since the video output terminals on this Monitor are

loop-through terminals, the devices connected to this

• External sync signals are automatically detected when

video output terminal should be correctly terminated.

they come in.

Otherwise, pictures become abnormally bright or the

• When both horizontal (HD)/vertical (VD) sync and

Monitor screen gets affected abnormally.

composite (Cs) sync are connected, HD/VD sync signals

 

will be used.

p VIDEO B terminals (page 12)

 

AUDIO (L/MONO, R) input terminals (pin jack)

Connect these terminals to the audio output terminals of a VCR, etc.

Y/C (S video) IN terminal (mini DIN 4pin)

Connect this terminal to the S-video output terminal of a VCR, etc.

VIDEO IN terminal (pin jack)

Connect this terminal to the video output terminal of a VCR, etc.

Note:

When both the video and S-video terminals are connected, the S-video terminal will have priority.

Y, Pb, Pr (VIDEO) input terminals (BNC)

Connect these terminals to the component signal output terminals of NTSC or high-vision equipment.

Note:

When these terminals are used as the component terminals (Y, Pb, Pr)—see “Setting the COMPONENT/ RGB B Input” on page 22, external sync signals (HD/Cs, VD) cannot be used.

7

Page 8
Image 8
JVC GM-V42E manual Video a terminals COMPONENT/RGB B input terminals, Video B terminals