SP/EP

Turn to take up

slack.

Erase Protection Gear

13

Recording Mode Setting

1 Pressing SP/EP alternates the setting between SP (standard play-provides higher picture and sound quality, better for dubbing) and EP (Extended Play- more economical, recording at 1/3 the speed of SP).

NOTE:

If the recording mode is switched during recording, the playback picture will be blurred at the switching point.

Loading/Unloading A Cassette

OPEN CASSETTE HOLDER

1 Slide EJECT until the holder opens. Do not use force to open.

INSERT/REMOVE CASSETTE

2 Make sure the label is facing outward.

CLOSE CASSETTE HOLDER

3 Press PUSH and make sure the holder is closed and locked.

NOTES:

A cassette holder can’t be opened unless a power supply is attached.

Make sure that the tape is not slack when loading the cassette. If there is any slack, turn the gear on the cassette in the direction of the arrow to take up the slack.

Make sure the Erase Protection tab is present. If not, cover the hole with adhesive tape. (Some cassettes have sliding tabs – in this case, check the tab's position.)

Page 13
Image 13
JVC GR-AX911U manual Recording Mode Setting, Loading/Unloading a Cassette, Open Cassette Holder, INSERT/REMOVE Cassette