29

BK BLACK FADER

Fades in/out to a black screen.

C BLUE FADER

Fades in/out to a blue screen.

MOSAIC FADER

Gradually turns/returns the picture into/from a mosaic pattern.

SHUTTER WIPE

A black screen moves in from the top and bottom, closing over the image like a shutter, or a new image pushes open the black screen vertically from the center. *During Auto Select mode, the new image wipes in over the old image, not a black screen.

SLIDE WIPE

A black screen moves in from the left to gradually cover the image, or a new image moves in from right to left. *During Auto Select mode, the new image wipes in over the old image, not a black screen.

CORNER WIPE

A black screen starts in the lower left corner and gradually fills the screen, or a new image starts in the upper right corner and fills the black screen.

*During Auto Select mode, the new image wipes in over the old image, not a black screen.

DISSOLVE

1 Press the RECORDING START/STOP button.

— Recording starts.

2 Press the RECORDING START/STOP button again.

Recording stops, and the Record–Standby mode is engaged.

Now the last scene is stored in memory.

Before the power turns off...

3 Press the RECORDING START/STOP button to resume recording.

The stored scene is gradually replaced by the new scene being shot.

SCROLL WIPE (AUTO SELECT only)

A new image scrolls up onto the screen.

WINDOW WIPE (AUTO SELECT only)

A new image enters from the center and moves towards the corners of the screen.

DOOR WIPE (AUTO SELECT only)

A new image opens like a door onto the screen.

AUTO SELECT

Press RECORDING START/STOP to begin or end recording, and 6 wipe-ins are automatically generated, in the order shown below:

SLIDE WIPE

SCROLL WIPE

CORNER WIPE

WINDOW WIPE

DOOR WIPE

SHUTTER WIPE

1 Press the RECORDING START/STOP button.

— Recording starts.

2 Press the RECORDING START/STOP button again.

Recording stops and the Record-Standby mode is engaged.

Now the last scene is stored in memory.

Before the power turns off...

3 Press the RECORDING START/STOP button to resume recording.

The new scene gradually wipes in over the stored scene.

Repeat steps 2 and 3 as you like.

NOTES

(for Dissolve and Auto Select):

Turning off the camcorder will erase the scene stored in memory. When a scene is erased from memory, the symbol indication blinks.

The sound for the last recording’s scene is not stored in memory.

This mode indicator blinks unless an image is stored in memory. In this case, shoot a scene first.

Page 29
Image 29
JVC GR-AX911U manual BK Black Fader, Blue Fader, Mosaic Fader, Shutter Wipe, Slide Wipe, Corner Wipe