[Ex. : Black Fader]
FADE IN
FADE OUT
Function indication
|
| After |
| ||
|
| Fade/Wipe | |||
Fade/Wipe | |||||
Mosaic Fader | 2 sec. |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
23
Fade/Wipe
These effects let you make
SELECT MODE
1 Turn the PROGRAM AE select dial to any position except AUTO LOCK.
SELECT FUNCTION
2 Press SELECT repeatedly until “
Fade/Wipe” appears.
ENGAGE FADE- OR WIPE-
STANDBY MODE
3 Press SET to cycle through the modes as shown at left. Once the desired mode appears, it is selected and reserved.
BK 
Off
(No indication)
BK Black Fader 
Mosaic Fader
Shutter Wipe
Slide Wipe
OFF
•The selected mode’s name and its indication are displayed in the viewfinder for approx. 2 seconds. Then the name disappears, and only the indication remains.
START RECORDING
4 Press Recording Start/Stop to start recording and activate fade- or
OR . . .
END RECORDING
SELECT button
PROGRAM AE select dial
SET button
NOTES:
●Pressing and holding the Recording Start/ Stop button allows you to record a black blank screen, or a mosaic pattern if Mosaic Fader is selected.
●The screen becomes slightly reddish when the Fade/Wipe is used with Sepia (☞ pg. 19).
Press Recording Start/Stop to end recording and engage fade- or
TO CANCEL FADE- OR WIPE- STANDBY MODE
5 While “
Fade/Wipe” is displayed, press SET twice.
•“OFF” is displayed for approx. 2 seconds and the reserved fade or wipe is cancelled.
BK Black Fader
Fades in/out to a black screen.
Mosaic Fader
Gradually turns/returns the picture into/from a mosaic pattern.
Shutter Wipe
A black screen moves in from the top and bottom, closing over the image like a shutter, or a new image pushes open the black screen vertically from the center.
Slide Wipe
A black screen moves in from the left to gradually cover the image, or a new image moves in from right to left.
