JVC GR-AXM220 specifications To check the end of the last recording, To re-record certain segments

5 SEC. REC Button

RETAKE (2/3)

Button

Display

PAUSE

5 S

5 Sec. Rec mode indicator

EN17

FEATURE: Quick Review

PURPOSE:

To check the end of the last recording.

OPERATION:

1)Set the Power Switch to “CAMERA” (“AUTO” or “PRO.”).

2)Press 2 and release quickly during the Record– Standby mode.

■Tape is rewound for approx. 2 seconds and played back automatically, then pauses in Record–Standby mode for the next shot.

NOTE:

Distortion may occur at the start of playback. This is normal.

FEATURE: Retake

PURPOSE:

To re-record certain segments.

OPERATION:

1)Make sure the camcorder is in the Record–Standby mode.

2)Press and hold either RETAKE to reach the start point for new recording. Pressing 3 forwards the tape and pressing 2 reverses it.

3)Press the Recording Start/Stop Button to start recording.

NOTE:

Noise bars appear and pictures may become monochrome or darken during Retake. This is normal.

FEATURE: 5Sec. Rec (5-sec. Recording)

PURPOSE:

To record a scene for 5 seconds, providing quick scene transitions like those seen in TV programs.

OPERATION:

■Make sure the recording mode is set to “SP”.

1)During Record–Standby, press 5SEC. REC. “ 5S” appears and 5Sec. Rec is reserved.

2)Press the Recording Start/Stop Button. Recording starts, and after 5-second recording is finished, the camcorder reenters the Record–Standby mode automatically.

■To cancel the 5Sec. Rec. function, press 5SEC. REC again so that “ 5S” disappears.

NOTE:

Fade/Wipe (☞ pg. 18) cannot be activated by pressing 5SEC. REC.