6
EN
SUPPLY POWER
QUICK
OPERATION
GUIDE
INSERTING A VIDEO
CASSETTE
AHook on.
B Push in.
PUSH Button | EJECT Switch |
BATTERY RELEASE
Using the battery pack
Hook its end to the camcorder 
and push the battery pack in until it locks in place 
. (Charging procedure, ☞ pg. 8)
To remove the battery pack
Slide BATTERY RELEASE and pull out the battery pack.
1Open the LCD monitor fully.
2Slide EJECT to open the cassette holder.
3 Insert a video cassette.
4 Press PUSH to close the cassette holder. (For more details, ☞ pg. 10)
PLAYBACK
2Rewind (2) Button
3ButtonPlay/Pause (4/6)
Stop (5) Button | 1 Set to |
| “PLAY”. |
1Set the Power Switch to “PLAY”.
2 Press 2.
—The tape will automatically stop at the beginning of the tape.
3Press 4/6.
—Playback starts and the playback picture appears.
•To stop playback, press 5. (For more details, ☞ pg. 28.)
•The viewfinder switches off automatically to save power when the LCD monitor is opened at an angle of over 60 degrees.
•The LCD monitor turns on/off when it is opened/closed at approx. 60 degrees.
Or simply play back the tape on a VHS VCR
using the Cassette Adapter (VHS Playpak). ☞ pg. 32
SHOOTING
1
LENS COVER
Open/Close Ring
2
Set to “AUTO” or “PRO.”.
3Recording Start/Stop Button
1 Turn the LENS COVER Open/Close Ring to open the lens cover.
2Set the Power Switch to “AUTO” or “PRO.”.
—The power lamp will light and an image will appear.
3Press the Recording Start/Stop Button.
— Recording starts.
•To stop recording temporarily, momentarily press the Recording Start/Stop Button once again.
(For more details, ☞ pgs. 14, 15)
•The viewfinder switches off automatically to save power when the LCD monitor is opened at an angle of over 60 degrees.
•The LCD monitor turns on/off when it is opened/closed at approx. 60 degrees.
