JVC GR-AXM50 EN Playback Basic Conn ections, Connection To a VCR a, Editing, Dubbing and Playback

36

EN PLAYBACK BasicConnections

There are three basic types of connections. When making the connections, refer also to your VCR and TV instruction manuals.

		Connection To A VCR [A]
		(Editing, Dubbing and Playback)
		NOTE:
	To AUDIO and	Use the optional Audio and Video cables.
When		CONNECT CAMCORDER TO VCR
	VIDEO connectors
connecting the		As shown in the illustration at left, connect the
cables, open
	Audio and Video	1 Audio and Video cables between the AUDIO and
the jack cover.
	cables (optional)
		VIDEO connectors on the camcorder and those on
		the VCR.

A	B	2	SUPPLY POWER
To AUDIO and			Turn on the camcorder, the VCR and the TV.
VIDEO IN
connectors			SELECT MODE
VCR			Set the VCR to its AUX input mode, and set the TV
		3 to its VIDEO mode.

Antenna

To AUDIO,

VIDEO and RF DC

OUT connectors

RF unit RF-V5U(optional)

NOTES:

●It is recommended to use the AC Power Adapter/Charger as the power supply instead of the battery pack.

●To monitor the picture and sound from the camcorder without inserting a tape, set the camcorder’s Power switch to “CAMERA”, then set your TV to the appropriate input mode.

●If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as interference will occur in the camcorder playback picture.

Connection To A TV With A/V Input Connectors [B] (Playback ONLY)

NOTE:

Use the optional Audio and Video cables.

CONNECT CAMCORDER TO TV

1 As shown in the illustration at left, connect the Audio and Video cables between the AUDIO and VIDEO connectors on the camcorder and those on the TV.

SELECT MODE

2 Set the TV to its VIDEO or AV mode (as specified in its instructions).

Connection To A TV With NO A/V Input Connectors (Playback ONLY)

NOTE:

Use the optional RF-V5U RF unit.

*Refer to the RF-V5U instruction manual for connection procedure.