JVC GR-AXM50 manual Picture Stabilizer, Exposure Control

24EN

RECORDINGAdvancedFeatures(cont.)

Picture Stabilizer

This feature compensates for unstable images caused by camera-shake, particularly noticeable at high magnifica- tion.

PICTURE STABILIZER

ACTIVATE PICTURE STABILIZER

1 Press PICTURE STABILIZER. “” appears in the LCD monitor or the viewfinder.

•To switch off the Picture Stabilizer, press PICTURE STABILIZER. The indicator disappears.

NOTES:

● Accurate stabilization may not be possible if hand shake is excessive, or under the following conditions:

• When shooting subjects with vertical or horizontal stripes

• When shooting dark or dim subjects

• When shooting subjects with excessive backlighting

• When shooting scenes with movement in various directions

•When shooting scenes with low-contrast backgrounds

●Switch off Picture Stabilizer when recording with the camcorder on a tripod.

+02

LCD monitor or viewfinder

Exposure Level Indicator

To brighten the image

–06 +06

Exposure Control

This feature automatically adjusts the iris for the best available picture quality, but you can override and make the adjustment manually.

SELECT MODE

1 Turn the PROGRAM AE select dial to any position except AUTO LOCK.

BRIGHTEN IMAGE

2 Press + (maximum +06). The Exposure level indicator appears in the LCD monitor or the viewfinder.

OR . . .

DARKEN IMAGE

Press – (maximum –06). The Exposure level indicator appears in the LCD monitor or the viewfinder.

When you want to return to the factory setting . . .

RESTORE INITIAL SETTING

3 Press + and – simultaneously. The standard setting is immediately restored and the Exposure level indicator disappears.

To darken the image