JVC GR-AXM70 Access Menu Screen, Make Setting, This camcorder is equipped with an easy-to-use

30EN RECORDING

AdvancedFeatures(cont.)

MENU		Using Menu For Detailed Adjustment
		This camcorder is equipped with an easy-to-use,
FAR	NEAR	on-screen menu system that simplifies many of the more
		detailed camcorder settings.

PROGRAM AE select dial

LCD monitor or viewfinder

Gain Up	S . LX
Tele Macro	OFF
Interval Timer	OFF
Rec Time	OFF
JLIP ID NO .	07
Tally	ON
Set Character
Date/Time
END :MENU KEY
Gain Up	NORM
Tele Macro	ON
Interval Timer	1min
Rec Time	1/2s
JLIP ID NO .	07
Tally	ON
Set Character
Date/Time
END :MENU KEY

SELECT MODE

1 Turn the PROGRAM AE select dial to any position except AUTO LOCK.

ACCESS MENU SCREEN

2 Press MENU.

SELECT FUNCTION

3 Press + or – to place the highlight bar on the desired function.

MAKE SETTING

4 The setting procedure depends on the function you select.

If you select Gain Up, Tele Macro, Interval Timer, Rec Time, JLIP ID NO or Tally. . . .

.... press FAR or NEAR to cycle through the choices

until the desired setting appears.

If you select Set Character or Date/Time, . . .

.... press NEAR to access the selection menu for

each function (Set Character – ☞ pg. 27; Date/ Time – ☞ pg. 11).

CLOSE MENU

5 Press MENU. The normal screen reappears.

NOTE:

The menu is available only in the Record-Standby mode.

PAUSE

If GAIN UP or TELE MACRO in the Menu has been changed from the factory settings, this mark appears.