INDEX LCD monitor/Viewfinder 
EN 45
7
8
9
0
!
@
#
$
1* 2* 3 4 | 5* 6 |
| ||
| 18min |
| Disp. | T30 | %* |
| REC SP | Sepia |
| ^ | |
| – 05 | & | ||
|
|
| ||
|
|
| * | |
|
|
| MWB | |
| 1min |
| PAUSE |
| ( |
| TAPE END |
| ) | ||
| 1/2s |
| |||
|
| |||
| Merry Christmas |
| q | |
|
|
| ||
| DEC 25. 97 | AM 10 : 24 : 56 |
| ||
LCD monitor/Viewfinder Indications
1 * Cassette Warning/Remaining | ☞ pg. 15 | |||
Tape Time |
| |||
When no cassette is inserted: the Cassette ( | ) | |||
Warning blinks. |
|
|
|
|
When Erase Protection tab is not in the position | ||||
that allows recording: the Cassette ( |
| ) Warning | ||
| ||||
lights. Otherwise, the Remaining Tape Time is |
| |||
displayed. When the Power switch is set to |
| |||
“PLAY” and a tape is loaded: the Cassette ( |
| ) | ||
| ||||
mark is displayed regardless of the Erase |
| |||
Protection tab’s position. |
|
|
|
|
2 * Recording Mode (SP/EP) Indicator | .... | ☞ pg. 12 | ||
3, 8 PROGRAM AE Indicator | ☞ pg. 20 | |||
Displayed at 3 for approx. 1 second when the PROGRAM AE select dial is switched from one position to another. Then only the indicator remains at 8.
3, 9 Fade/Wipe Standby Indicator ........ ☞ pg. 25
Displayed at 3 for approx. 2 seconds when the Fade/Wipe is switched from one function to another by pressing the SET button. Then only the indicator remains at 9.
4 Program Manager Function | ☞ pg. 25 |
Indication | |
Appears when the PROGRAM AE select dial is | |
set to any position other than AUTO LOCK. | |
5 * Tape Length Display | ☞ pg. 12 |
6 Zoom Indicator bar | ☞ pg. 18 |
7 Recording Indicator | ☞ pg. 15 |
0 Picture Stabilizer Indicator | ☞ pg. 24 |
! Interval Time/Recording | ☞ pg. 32 |
Time Indicator | |
@ | ☞ pg. 15 |
•Lens Cover Warning: | ☞ pg. 15 |
LENS COVER | |
# Instant Title Display | ☞ pg. 26 |
$ Date/Time Character Display | ☞ pg. 28 |
%* Battery Pack Remaining Power Indicator Changes as follows according to the battery pack’s remaining power level:
“
”. When the power is almost gone, the indicator blinks, then the unit shuts off. Replace the battery pack with a fully charged one.
(Note: The symbol containing 3 darkened
squares — 
— does not necessarily mean that the battery pack is fully charged.)
^ Focus Indicator | ☞ pg. 22 |
& Exposure Level Indicator | ☞ pg. 24 |
* White Balance Mode Indicator | ☞ pg. 29 |
( Menu Setting Change Indicator | ☞ pg. 30 |
) Clock Warning |
|
Once the power is turned on and the indicator blinks for about 10 seconds, perform the date and time settings (☞ pg. 11). After setting is complete, turn the power off and disconnect the power source. If you
q • Tape End Display: TAPE END ........... ☞ pg. 15
Appears when the end of the tape is reached during playback, recording or
•Condensation Warning: 
When this indication appears, all functions are disabled. Turn the unit off (without removing the power source) for a few hours, and when you turn it on again the indicator should disappear.
*: During recording, pressing DISPLAY lets you remove indications marked with * from the screen.
