|
|
|
|
|
| EN |
| 81 | |
|
|
|
|
|
|
| |||
When the System Select Switch is set to “VIDEO”: | |||||||||
|
|
|
|
|
|
| |||
|
|
| SYMPTOM |
| POSSIBLE CAUSE(S) |
| |||
|
| RECORDING |
|
|
|
|
|
| |
|
| Recording cannot be performed. | ● Make sure the Erase Protection tab is in the position that |
| |||||
|
|
|
| allows recording. If not, slide the tab. Some cassettes have |
| ||||
|
|
|
| removable tabs. If the tab has been removed, cover the |
| ||||
|
|
|
| hole with adhesive tape (☞ pg. 17). |
| ||||
|
|
|
| ● If the System Select Switch is set to “D.S.C.”, it is not |
| ||||
|
|
|
| possible to record onto the tape. Change the Switch |
| ||||
|
|
|
| position to “VIDEO” (☞ pg. 18). |
| ||||
|
| Recording does not start. | ● The camcorder Power Switch has not been set to |
| |||||
|
|
|
| “CAMERA” (☞ pg. 18). |
| ||||
|
|
|
|
|
|
|
|
| |
|
| PLAYBACK |
|
|
|
|
|
| |
|
| The tape is running, but there’s no | ● The TV has not been set to its VIDEO mode or channel. |
| |||||
|
| playback picture. | ● If A/V connection is used, the TV’s VIDEO/TV Switch has |
| |||||
|
|
|
| not been set to VIDEO. |
| ||||
|
|
|
| ● The RF unit has not been set to the correct channel. |
| ||||
|
| Playback cannot be performed. | ● If the System Select Switch is set to “D.S.C.”, it is not |
| |||||
|
|
|
| possible to play back a tape. Change the Switch position |
| ||||
|
|
|
| to “VIDEO” (☞ pg. 42). |
| ||||
|
| Playback picture is blurred or | ● The video heads are dirty or worn out. Consult your |
| |||||
|
| interrupted. | nearest JVC dealer for head cleaning or replacement. |
| |||||
|
| The counter indication is blurred | ● This is normal. |
| |||||
|
| during Still playback. |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
| TAPE TRANSPORT |
|
|
|
|
|
| |
|
| The tape stops during | ● The Counter Memory Function has been activated |
| |||||
|
| or rewind. | (☞ pg. 44). |
| |||||
|
| Rewinding or | ● The tape is already fully wound on one reel or the other. |
| |||||
|
| be performed. |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
| OTHER |
|
|
|
|
|
| |
|
| The picture is blurred in the Quick | ● This is normal while recording in the EP mode. Some noise |
| |||||
|
| Review or Retake mode. | may be present while recording in the SP mode (☞ pg. 16). |
| |||||
|
| The date and time displays | ● If you remove the power source from the camcorder while |
| |||||
|
| disappear. | the power is on, all settings and selections are erased. Make |
| |||||
|
|
|
| sure to turn the camcorder’s power off before disconnecting |
| ||||
|
|
|
| the power source. |
| ||||
|
|
|
|
| |||||
|
| The wrong date and time are | ● If you have not performed Date/Time Setting (☞ pg. 13), |
| |||||
|
| displayed/recorded. | the date and time are not displayed/recorded correctly. Be |
| |||||
|
|
|
| sure that Date/Time setting is carried out. |
| ||||
|
| The tape won’t eject. | ● The battery pack is running low. |
| |||||
|
|
|
| ● If the LCD monitor is not open over 45 degrees, EJECT |
| ||||
|
|
|
| switch does not function. |
| ||||
|
|
|
|
|
|
|
|
|
|
