JVC GR-AXM710 manual Video Playback Using The Cassette Adapter EN49, Cassette Adapter VHS Playpak

VIDEOPLAYBACKUsingTheCassetteAdapterEN49

Cassette Adapter (VHS Playpak)

Use this to play back a VHS-C video cassette recorded with this camcorder on a VHS VCR. It is fully compatible with any VHS video cassette recorder. The C-P7U adapter is battery powered and automatically performs tape loading and unloading.

VCR

Compartment door

Sliding latch

Compact video cassette

Reels

1 INSERT BATTERY

Slide the battery cover up to remove it, and install one “AA(R6)” size battery as shown in the illustration at left, then reattach the cover.

2 INSERT CASSETTE IN ADAPTER Slide the latch to open the adapter compartment door, then insert the cassette and close the compartment door.

3 PLAY BACK ON CONNECTED VCR Load the cassette adapter into the VCR and play the tape back as you would any other.

4 REMOVE CASSETTE FROM ADAPTER Slide the latch and the compartment door opens automatically. This may take around 10 seconds. Do not attempt to force the adapter open. Then, insert your finger in the hole on the underside of the adapter as shown in the illustration at left, and push up and remove the cassette.

NOTES:

●During tape loading and unloading, do not touch the reels for safety and tape protection.

●During special-effect playback (slow motion, still frame, etc.), the picture may vibrate or noise bars may appear on the screen.

●To record on a VCR using a compact cassette and the adapter, cover the adapter’s recording safety hole with adhesive tape.

Recording safety hole