26 EN
RECORDING
Advanced Features (cont.)

B

K
Fader
Fades in/out to a black screen.
Mosaic (Fader)
Gradually turns/returns the picture into/from a mosaic
pattern.
Shutter (Wipe)
A black screen moves in from the top and bottom,
closing over the image like a shutter, or a new image
pushes open the black screen vertically from the center.
Slide (Wipe)
A black screen moves in from the left to gradually cover
the image, or a new image moves in from right to left.
NOTES:
●
Pressing and holding the Recording Start/Stop Button
allows you to record a black blank screen or a mosaic
pattern if Mosaic Fader is selected.
●
The screen becomes slightly reddish when the Fade/Wipe is
used with Sepia (
Z
pg. 25).
●
With the Electronic fog filter mode (
Z
pg. 25) engaged,
when Fader (not Mosaic) is used, the image fades in/out to a
white screen.
MOSAIC
4
EFFECT
OFF
(No indication)
OFF
B
K
FADER
MOSAIC
SHUTTER
SLIDE
B
K
Fade-in
Fade-out
Fade/Wipe
These effects let you make pro-style scene transitions.
Fade- or wipe-in works at recording start, and fade- or
wipe-out works at recording end or when you enter
Record–Standby mode.

ENGAGE FADE- OR WIPE-

STANDBY MODE

1
Press EFFECT to cycle through the modes as shown
at left. Once the desired mode appears, it is selected
and reserved.
•The selected mode’s name and its indication are
displayed for approx. 2 seconds. Then the name
disappears, and only the indication remains.

START OR END RECORDING

2
Press Recording Start/Stop Button to activate fade-in/
out or wipe-in/out.

TO CANCEL FADE- OR WIPE-

STANDBY MODE

3
Press EFFECT repeatedly until
“OFF” appears
.
•“OFF” is displayed for approx. 2 seconds and the
fade/wipe standby mode is canceled.
NOTE (for Fade/Wipe, Wide, Super LoLux, Instant Titles and Picture Stabilizer) :
When the Select Dial is turned to AUTO LOCK, the above functions will be set to the Factory settings (Fade/Wipe-
standby : “OFF”, Wide mode : off, Super LoLux : “MAX”, Instant Title : off, Picture Stabilizer: off). Then when the
Select Dial is returned to any position except AUTO LOCK, the above functions return to the settings you selected
before turning it to AUTO LOCK. However, if the function is switched during AUTO LOCK, the selected mode
will be set and will remain unchanged even when the Select Dial is turned to any position except AUTO LOCK.
[Ex. : Fader]
Recording Start/Stop Button
Function indication
EFFECT
After 2 sec.
LCD monitor or
viewfinder