JVC GR-AXM917UM manual After Use, Cleaning The Camcorder

Set the Power Switch to “POWER OFF” to turn off the camcorder.

USERMAINTENANCE

LENS COVER Open/Close Ring

BATTERY RELEASE

Set to “POWER OFF”.

EN65

After Use

1

2 Open the LCD monitor to an angle of over 60 degrees. Slide EJECT to open the cassette holder, then remove the cassette.

3 Close and lock the cassette holder by pressing PUSH.

4 Close and lock the LCD monitor.

5 Slide BATTERY RELEASE to remove the battery pack.

6 Turn the LENS COVER Open/Close Ring to close the lens cover.

Cleaning The Camcorder

1 CLEAN EXTERIOR Wipe gently with a soft cloth.

Remove.

•Put cloth in diluted mild soap and wring it well to

PUSHEJECTwipe off heavy dirt, then wipe again with a dry cloth.

2 CLEAN LCD MONITOR

Open the LCD monitor and wipe it gently with a soft cloth. Be careful not to damage the monitor. Close the LCD monitor.

3 CLEAN LENS

Blow it with a blower brush, then wipe it gently with lens cleaning paper.

4

5

6

REMOVE EYEPIECE

Turn the eyepiece counterclockwise and pull it out.

CLEAN VIEWFINDER

Remove dust using a blower brush.

RE-ATTACH EYEPIECE

Re-attach the eyepiece and turn it clockwise.

NOTES:

●Avoid using strong cleaning agents such as benzine or alcohol.

●Cleaning should be done only after the battery pack has been removed or other power units have been disconnected.

●Mold may form if the lens is left dirty.

●When using a cleaner or chemically treated cloth, refer to the cautions that came with it.

●When removing the eyepiece, be sure to hold the viewfinder securely.