JVC GR-AXM917UM manual Loading/Unloading a Cassette, Open LCD Monitor, Open Cassette Holder

Cassette holder

PUSH Button EJECT Switch

Turn to take up slack.

Erase Protection Gear

EN15

Loading/Unloading A Cassette

1 OPEN LCD MONITOR

Open the LCD monitor to an angle of over 60 degrees.

2 OPEN CASSETTE HOLDER

Slide EJECT until the holder opens. Do not use force to open.

3 INSERT/REMOVE CASSETTE Make sure the label is facing outward.

4 CLOSE CASSETTE HOLDER

Press PUSH and make sure the holder is closed and locked.

5 CLOSE LCD MONITOR

First make sure the holder is closed. Then close the

LCD monitor.

NOTES:

●Closing the LCD monitor while the cassette holder is still open may cause damage to the LCD monitor.

●The cassette holder can’t be opened unless a power supply is attached.

●Make sure that the tape is not slack when loading the cassette. If there is any slack, turn the gear on the cassette in the direction of the arrow to take up the slack.

●Make sure the Erase Protection tab is in the position that allows recording. If not, slide the tab. Some cassettes have removable tabs. If the tab has been removed, cover the hole with adhesive tape.

●The cassette holder cannot be opened while the camcorder is in the record mode.