GETTING STARTED EN 11

Provided Accessories

NOTES:

 

● In order to maintain optimum performance of the

 

camcorder, provided cables may be equipped with

 

one or more core filter. If a cable has only one core

 

filter, the end that is closest to the filter should be

 

connected to the camcorder.

OR

● Make sure to use the provided cables for

 

connections. Do not use any other cables.

aAC Adapter AP-V16U or AP-V14U

bBattery Pack BN-VF707U

cAudio/Video Cable (ø3.5 mini-plug to RCA plug)

dUSB Cable

eCore Filter (for USB cable,  pg. 12 for attachment)

fCD-ROM

gRemote Control Unit RM-V720U

hLithium Battery CR2025* (for remote control unit)

iShoulder Strap (see the right column for attachment)

jLens Cap (see the right column for attachment)

kMiniDV Cassette Tape (60 min.)

*A lithium battery is pre-installed in the Remote Control Unit at time of shipment (with insulation sheet). To use the Remote Control Unit, remove the insulation sheet.

How To Attach The Lens Cap

To protect the lens, attach the provided lens cap to the camcorder as shown in the illustration.

NOTE:

To confirm the lens cap is on correctly make sure the cap is flush to the camcorder.

Place here during shooting.

How To Attach The Shoulder Strap

Follow the illustration.

1 Thread the strap through the eyelet.

2 Fold it back and thread it through the strap guide and the buckle.

●To adjust the length of the strap, loosen and then tighten the strap in the buckle.

3 Slide the strap guide fully towards the eyelet.

Buckle

Strap guide

2 2

1

3

 

Eyelet