JVC GR-D271 Power, Using The Battery Pack, PUSH BATT, Charging The Battery Pack, To detach the battery pack, Maximum continuous recording time

			GETTING STARTED EN 13
Power		To detach the battery pack
		Slide the battery pack upward while pressing
This camcorder’s 2-way power supply system		PUSH BATT. to detach it.
lets you choose the most appropriate source of		Battery pack	Charging time
power. Do not use provided power supply units		BN-VF707U*	Approx. 1 hr. 30 min.
with other equipment.
		BN-VF714U	Approx. 2 hr. 40 min.
Charging The Battery Pack
		BN-VF733U	Approx. 5 hr. 40 min.
	Power switch	* Provided
		NOTES:
M A
	POWER/CHARGE lamp
POWER/		● This product includes patented and other
		proprietary technology and will operate only
CHARGE	Battery pack mount
		with JVC Data Battery. Use the JVC
	PUSH BATT.	BN-VF707U/VF714U/VF733U battery packs.
		Using generic non-JVC batteries can cause
	Battery pack	damage to the internal charging circuitry.
		● If the protective cap is attached to the battery
		pack, remove it first.
	Arrow	● During charging, the camcorder cannot be
		operated.
	mark	● Charging is not possible if the wrong type of
		battery is used.
To DC connector		● When charging the battery pack for the first time
		or after a long storage period, the POWER/
Open the cover.		CHARGE lamp may not light. In this case, remove
		the battery pack from the camcorder, then try
		charging again.
		● If the battery operation time remains extremely
		short even after having been fully charged, the
		battery is worn out and needs to be replaced.
AC Adapter	To AC outlet	Please purchase a new one.
		● Since the AC Adapter processes electricity
1 Set the Power Switch to “OFF”.		internally, it becomes warm during use. Be sure to
		use it only in well-ventilated areas.
2 With the arrow on the battery pack pointing		● Using the optional AA-VF7 Battery Charger, you
		can charge the BN-VF707U/VF714U/VF733U
downward, push the battery pack slightly against		battery pack without the camcorder.
the battery pack mount a.		● After 5 minutes has elapsed in Record-Standby
3 Slide down the battery pack until it locks in		mode with the cassette inserted, the camcorder
		will automatically turn off its power supplied from
place b.
		the AC adapter. In this case, the battery charge
4 Connect the AC Adapter to the camcorder.
		starts if the battery is attached to the camcorder.
5 Plug the AC Adapter into an AC outlet. The		Using The Battery Pack
POWER/CHARGE lamp on the camcorder
		Perform steps 2 – 3 in “Charging The Battery
blinks to indicate charging has started.
6 When the POWER/CHARGE lamp goes out,		Pack”.
charging is finished. Unplug the AC Adapter		Maximum continuous recording time
from the AC outlet. Disconnect the AC Adapter			LCD monitor
from the camcorder.		Battery pack		Viewfinder on
			on
		BN-VF707U*	1 hr. 5 min.	1 hr. 25 min.
		BN-VF714U	2 hr. 20 min.	3 hr.
		BN-VF733U	5 hr. 25 min.	7 hr. 5 min.
		* Provided	CONTINUED ON NEXT PAGE

GETTING STARTED