|
|
| FEATURES FOR RECORDING EN 41 | |
Manual White Balance Adjustment | Select “OFF” in step 3. The effect indicator | |||
disappears. | ||||
Adjust the white balance |
|
| NOTES: | |
manually when shooting |
|
| ● You can extend the length of a Wipe or Fader by | |
under various types of |
|
| pressing and holding the Recording Start/Stop | |
lighting. |
|
| Button. | |
1 Set the Power Switch |
|
| ● Some Wipe/Fader Effects cannot be used with | |
|
| certain modes of Program AE with special effects. | ||
to “M”. | White paper | ( pg. 42) In this case, the selected indicator | ||
2 Hold a sheet of plain |
|
| blinks or goes out. | |
|
|
| ||
white paper in front of the subject. Adjust zoom | WIPE/FADER | |||
or position yourself so that the white paper fills |
| |||
the screen. |
|
| OFF: Disables the function. | |
3 Select “MWB” in “u W.BALANCE” menu |
| |||
( pg. 31), then press and hold MENU until |
| screen. | ||
begins blinking. |
|
| ||
● When the setting is completed, | stops blinking. | |||
screen. | ||||
4 Press MENU twice. The Menu Screen closes | ||||
and the Manual White Balance indicator | is | |||
from a black and white screen, or fade out from | ||||
displayed. |
|
| ||
|
| color to black and white. | ||
NOTES: |
|
| ||
|
| |||
● In step 2, it may be difficult to focus on the white | ||||
from the upper right to the lower left corner, or | ||||
paper. In such a case, adjust focus manually. |
| |||
| wipe out from lower left to upper right, leaving a | |||
( pg. 38) |
|
| ||
|
| black screen. | ||
● A subject can be shot under various types of |
| |||
| ||||
lighting conditions indoors (natural, fluorescent, | ||||
candlelight, etc.). Because the color temperature | centre of a black screen and wipes in toward the | |||
is different depending on the light source, the |
| corners, or comes in from the corners, gradually | ||
subject tint will differ depending on the white |
| wiping out to the centre. | ||
balance settings. Use this function for a more |
| |||
natural result. |
|
| ||
|
| wipe out from left to right. | ||
● Once you adjust white balance manually, the |
| |||
|
| |||
setting is retained even if the power is turned off or | ||||
the battery removed. |
|
| a black screen open to the left and right, | |
Wipe Or Fader Effects |
|
| revealing the scene, or wipe out and the black | |
|
| screen reappears from left and right to cover the | ||
|
|
| scene. | |
These effects let you make |
| |||
transitions. Use them to spice up the transition | the bottom to the top of a black screen, or wipes | |||
from one scene to the next. |
|
| ||
|
| out from top to bottom, leaving a black screen. | ||
Wipe or Fader works when video recording is | ||||
started or stopped. |
|
| ||
|
| of a black screen toward the top and bottom, or | ||
1 Set the VIDEO/MEMORY Switch to “VIDEO”. | ||||
wipe out from the top and bottom toward the | ||||
2 Set the Power Switch to “M”. |
|
| centre leaving a black screen. | |
|
|
|
3 Set “v” to the desired mode. ( pg. 31)
●The WIPE/FADER menu disappears and the effect is reserved.
●The selected effect indicator appears.
4 Press the Recording Start/Stop Button to activate the