GETTING STARTED EN 11

Provided Accessories

NOTES:

 

● In order to maintain optimum performance of the

 

camcorder, provided cables may be equipped with

 

one or more core filter. If a cable has only one core

 

filter, the end that is closest to the filter should be

 

connected to the camcorder.

 

● Make sure to use the provided cables for

 

connections. Do not use any other cables.

aAC Adapter AP-V17E

bBattery Pack BN-VF707U

cS/AV Cable

dUSB Cable

eCore Filter (for USB cable,  pg. 12 for attachment)

fCD-ROM

gCable Adapter

hRemote Control Unit RM-V720U

iLithium Battery CR2025* (for remote control unit)

jShoulder Strap (see the right column for attachment)

kLens Cap (see the right column for

attachment)

*A lithium battery is pre-installed in the Remote Control Unit at time of shipment (with insulation sheet). To use the Remote Control Unit, remove the insulation sheet.

How To Attach The Lens Cap

To protect the lens, attach the provided lens cap to the camcorder as shown in the illustration.

NOTE:

To confirm the lens cap is on correctly make sure the cap is flush to the camcorder.

Place here during shooting.

How To Attach The Shoulder Strap

Follow the illustration.

1 Thread the strap through the eyelet.

2 Fold it back and thread it through the strap guide and the buckle.

●To adjust the length of the strap, loosen and then tighten the strap in the buckle.

3 Slide the strap guide fully towards the eyelet.

Buckle

Strap guide

2 2

1

3

 

Eyelet