EDITING EN 43

Dubbing To A VCR

 

NOTES:

 

 

 

 

● It is recommended to use the AC Adapter as

 

 

 

 

the power supply instead of the battery pack.

 

 

 

 

( pg. 14)

To S/AV connector

 

 

● To choose whether or not the following displays

 

 

appear on the connected TV

 

 

 

 

S/AV cable

 

Open the cover.

• Date/time

 

Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.

 

mark

(provided)

 

( pg. 31, 36) Or, press DISPLAY on the

 

 

 

 

 

 

 

 

remote control to turn on/off the date indication.

 

 

 

 

• Time code

 

 

 

 

Set “TIME CODE” to “OFF” or “ON”.

 

 

 

 

( pg. 31, 36)

1

2

3

4

• Indications other than date/time and time code

Set “ON SCREEN” to “OFF”, “LCD” or “LCD/

TV”. ( pg. 31, 36)

“Y/C”/“CVBS”

Cable

Adapter*

Video Out Select

 

 

 

 

 

 

Switch

 

 

To VCR

 

TV

 

 

 

 

VCR

ATo S-VIDEO IN**

BYellow to VIDEO IN

CRed to AUDIO R IN

DWhite to AUDIO L IN

*If your VCR has a SCART connector, use the provided cable adapter.

**Connect when your TV/VCR has an S-VIDEO IN connector. In this case, it is not necessary to connect the yellow video cable.

NOTE:

Set the video out select switch of the cable adapter as required:

Y/C: When connecting to a TV or VCR which accepts Y/C signals and uses an S-Video cable. CVBS: When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/ video cable.

1 Following the illustrations, connect the camcorder and the VCR’s input connectors.

2 Start playback on the camcorder. ( pg. 20)

3 At the point you want to start dubbing, start recording on the VCR. (Refer to the VCR’s instruction manual.)

4 To stop dubbing, stop recording on the VCR, then stop playback on the camcorder.