Connect the AC Adapter to the camcorder.

 

 

 

 

 

GETTING STARTED

EN 13

 

 

 

 

 

 

 

 

Power

 

To detach the battery pack

 

 

 

 

 

Slide the battery pack upward while pressing

This camcorder’s 2-way power supply system

 

PUSH BATT. to detach it.

 

 

 

 

 

lets you choose the most appropriate source of

 

Battery pack

Charging time

power. Do not use provided power supply units

 

 

 

 

 

 

BN-VF707U*

Approx. 1 hr. 30 min.

with other equipment.

 

 

 

 

 

 

Charging The Battery Pack

 

BN-VF714U

Approx. 2 hr. 40 min.

 

 

 

 

 

 

BN-VF733U

Approx. 5 hr. 40 min.

 

 

 

 

 

 

 

Power switch

M A OFF PLAY

POWER/CHARGE lamp

 

POWER/

 

CHARGE

Battery pack mount

 

 

PUSH BATT.

 

Battery pack

 

Arrow

 

mark

To DC connector

Open the cover.

To AC outlet

AC Adapter

1 Set the Power Switch to “OFF”.

2 With the arrow on the battery pack pointing downward, push the battery pack slightly against the battery pack mount a.

3 Slide down the battery pack until it locks in place b.

4

5 Plug the AC Adapter into an AC outlet. The POWER/CHARGE lamp on the camcorder blinks to indicate charging has started.

6 When the POWER/CHARGE lamp goes out, charging is finished. Unplug the AC Adapter from the AC outlet. Disconnect the AC Adapter from the camcorder.

* Provided

NOTES:

●It is recommended that only genuine JVC batteries are used in this camcorder. Using generic non-JVC batteries can cause damage to the internal charging circuitry.

●If the protective cap is attached to the battery pack, remove it first.

●During charging, the camcorder cannot be operated.

●Charging is not possible if the wrong type of battery is used.

●When charging the battery pack for the first time or after a long storage period, the POWER/ CHARGE lamp may not light. In this case, remove the battery pack from the camcorder, then try charging again.

●If the battery operation time remains extremely short even after having been fully charged, the battery is worn out and needs to be replaced.

Please purchase a new one.

●Since the AC Adapter processes electricity internally, it becomes warm during use. Be sure to use it only in well-ventilated areas.

●Using the optional AA-VF7 Battery Charger, you can charge the BN-VF707U/VF714U/VF733U battery pack without the camcorder.

●After 5 minutes has elapsed in Record-Standby mode with the cassette inserted, the camcorder will automatically turn off its power supplied from the AC adapter. In this case, the battery charge starts if the battery is attached to the camcorder.

Using The Battery Pack

Perform steps 2 – 3 in “Charging The Battery Pack”.

Maximum continuous recording time

Battery pack

LCD monitor

Viewfinder on

on

 

 

 

 

 

BN-VF707U*

1 hr. 5 min.

1 hr. 25 min.

 

 

 

BN-VF714U

2 hr. 20 min.

3 hr.

 

 

 

BN-VF733U

5 hr. 25 min.

7 hr. 5 min.

 

 

 

* Provided

 

 

CONTINUED ON NEXT PAGE