JVC GR-D390U Provided Accessories, 12 EN GETTING STARTED, How To Attach The Shoulder Strap, NOTE:, Buckle, Eyelet, NOTES:, Strap guide, How To Attach The Lens Cap

12 EN GETTING STARTED
Provided Accessories	How To Attach The Lens Cap
	To protect the lens, attach
	the provided lens cap to the
	camcorder as shown in the
	illustration.
OR	NOTE:
	To confirm the lens cap is on
	correctly make sure the cap is
	flush to the camcorder.

Place here during shooting.

1AC Adapter AP-V14U or AP-V18U

2 Battery Pack BN-VF707U

3 Audio/Video Cable (ø3.5 mini-plug to RCA

plug)

4 USB Cable

5 Core Filter (for USB cable, pg. 13 for

attachment)

6 CD-ROM

7 Remote Control Unit RM-V720U

8 Lithium Battery CR2025* (for remote control

unit)

9 Memory Card (Already inserted in the

camcorder)

! Shoulder Strap (see the right column for

attachment)

" Lens Cap (see the right column for attachment)

* A lithium battery is pre-installed in the Remote Control Unit at time of shipment (with insulation sheet). To use the Remote Control Unit, remove the insulation sheet.

How To Attach The Shoulder Strap

Follow the illustration.

1 Thread the strap through the eyelet.

2 Fold it back and thread it through the strap guide and the buckle.

●To adjust the length of the strap, loosen and then tighten the strap in the buckle.

3 Slide the strap guide fully towards the eyelet.

	Buckle
Strap guide	2

2

13

Eyelet

NOTES:

●In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core filter. If a cable has only one core filter, the end that is closest to the filter should be connected to the camcorder.

●Make sure to use the provided cables for connections. Do not use any other cables.