16 EN

GETTING STARTED

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Power-Linked Operation

 

 

 

 

 

 

 

 

 

 

 

Date/Time Settings

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

When the Power Switch is set to “REC”, you can

 

 

 

 

 

 

 

 

 

The date/time is recorded onto the tape at all

also turn on/off the camcorder by opening/

 

 

times, but its display can be turned on or off

closing the LCD monitor or pulling out/pushing in

 

 

during playback. ( pg. 34, 35)

the viewfinder.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 Perform steps 1 – 5 in “Language Settings”

INFORMATION:

 

 

 

 

 

 

 

 

 

 

The following explanations in this manual

 

on the left column.

 

 

 

supposes the use of LCD monitor in your

 

2 Press 3, 4, 2 or 1 to select “CLOCK ADJ.”,

operation. If you want to use the viewfinder,

 

and press SET. The date display format is

close the LCD monitor and pull out the

 

highlighted.

 

 

 

viewfinder fully.

 

 

 

 

 

 

 

 

 

 

3 Press 3 or 4 to select the desired date

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Language Settings

 

 

 

 

 

 

 

 

 

 

display format, then press SET or 2. Select from

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

“MONTH.DATE.YEAR”, “DATE.MONTH.YEAR”

The language on the display can be changed.

 

or “YEAR.MONTH.DATE”.

 

 

 

 

4 Press 3 or 4 to select the time display

( pg. 31, 34)

 

 

 

 

 

 

 

 

 

 

1 Set the Power Switch to “REC” while pressing

 

format, then press SET or 2. Select from “24h”

 

or “12h”.

 

 

 

down the Lock Button located on the switch.

 

5 Set the year, month, date, hour and minute.

2 Open the LCD monitor fully. ( pg. 19)

 

 

Press 3 or 4 to select the value, then press SET

3 Set the recording mode to “M”.( pg. 15)

 

or 2. Repeat this step until you have input all the

4 Press MENU. The Menu Screen appears.

 

settings.

 

 

 

 

NOTE:

 

 

 

5 Press 3, 4, 2 or 1 to

 

 

 

 

 

 

 

 

 

 

 

 

 

select “DISPLAY”, and

 

 

LANGUAGE

 

 

 

Press 1 to return to the previous setting.

 

 

 

 

 

6 Press MENU.The Menu

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

press SET. The DISPLAY

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Menu appears.

 

 

 

 

 

 

 

 

 

 

screen closes.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CLOCK ADJ .

 

6 Press 3, 4, 2 or 1 to

 

 

DEMO

 

 

 

 

 

 

 

 

 

 

 

 

0001

 

 

 

 

 

 

 

 

 

 

 

MONTH . DATE . YEAR

1 2h

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

select “LANGUAGE”, and

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DEC . 06 . 2 006

 

press SET.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

07 : 05 AM

 

7 Press 3 or 4 to select

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the desired language, and

 

 

 

LANGUAGE

 

 

 

 

 

 

 

 

 

 

press SET or 2.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

● Press 1 whenever you

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ENGLISH

 

 

 

 

 

 

 

 

 

 

 

 

 

want to return to the

 

 

 

FRANÇAIS

 

 

 

 

 

 

 

 

 

 

 

 

 

previous menu screen.

 

 

 

ESPAÑOL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PORTUGUÊS

 

 

 

 

 

 

 

 

 

 

8 Press MENU. The

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Menu Screen closes.