12 EN GETTING STARTED |
|
Provided Accessories | How To Attach The Lens Cap |
| To protect the lens, attach |
| the provided lens cap to the |
| camcorder as shown in the |
| illustration. |
OR | NOTE: |
| To confirm the lens cap is on |
| correctly make sure the cap is |
| flush to the camcorder. |
1 AC Adapter |
2 Battery Pack |
3 Audio/Video Cable (ø3.5 |
plug) |
4 USB Cable |
Follow the illustration.
1 Thread the strap through the eyelet.
2 Fold it back and thread it through the strap guide and the buckle.
●To adjust the length of the strap, loosen and then tighten the strap in the buckle.
3 Slide the strap guide fully towards the eyelet.
5 Core Filter (for USB cable, pg. 13 for |
attachment) |
6 |
7 Remote Control Unit |
8 Lithium Battery CR2025* (for remote control |
unit) |
9 Shoulder Strap (see the right column for |
attachment) |
! Lens Cap (see the right column for |
attachment) |
* A lithium battery is |
Control Unit at time of shipment (with insulation |
2 2
sheet). To use the Remote Control Unit, remove |
the insulation sheet. |
●In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core filter. If a cable has only one core filter, the end that is closest to the filter should be connected to the camcorder.
●Make sure to use the provided cables for connections. Do not use any other cables.
1 3
Eyelet