34 EN MENUS FOR DETAILED ADJUSTMENT
DISPLAY

●The following menu settings can be changed only when the Power Switch is set to “REC”.

●The DISPLAY settings except “BRIGHT” and “LANGUAGE” are effective only for shooting.

[ ] = Factory-preset

BRIGHT

pg. 17, “Brightness Adjustment Of The Display”

CLOCK ADJ.

pg. 16, “Date/Time Settings”

LANGUAGE

/ / / [ENGLISH] / FRANÇAIS /ESPAÑOL / PORTUGUÊS

The language setting can be changed. ( pg. 16)

DATE/TIME

[OFF]: The date/time does not appear.

ON: The date/time is always displayed.

●The date indication can also be turned on/off by pressing the DISPLAY Button on the remote control. ( pg. 23, 42)

ON SCREEN

LCD: Keeps the camcorder’s display (except the date, time and time code) from appearing on the connected TV screen.

[LCD/TV]: Makes the camcorder’s display appear on screen when the camcorder is connected to a TV.

TIME CODE

[OFF]: Time code is not displayed.

ON: Time code is displayed on the camcorder and on the connected TV. Frame numbers are not displayed during recording. ( pg. 20)

DEMO MODE

OFF: Automatic demonstration will not take place.

[ON]: Demonstrates certain functions such as Wipe/Fader and Effects, etc., and can be used to confirm how these functions operate.

Demonstration starts in the following cases:

●When the Menu Screen is closed after “DEMO MODE” is turned “ON”.

●With “DEMO MODE” set to “ON”, if there is no operation for about 3 minutes after the Power Switch is set to “REC”.

●Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 3 minutes after that, the demonstration will resume.

NOTES:

●If a cassette is in the camcorder, the demonstration cannot be turned on.

●“DEMO MODE” remains “ON” even if the camcorder power is turned off.

DSC

[ ] = Factory-preset

QUALITY[FINE] / STANDARD

The Picture Quality mode can be selected to best match your needs. Two Picture Quality

modes are available: FINE ( ) and STANDARD ( ) (in order of quality).

NOTE:

The number of storable images depends on the selected picture quality as well as the composition of the subjects in the images and the type of memory card being used. ( pg. 26)

REC SELECT

[ (TAPE)]: When Snapshot recording is performed with the VIDEO/MEMORY Switch set to “VIDEO”, still images are recorded only onto the tape.

/ (TAPE/CARD): When Snapshot recording is performed with the VIDEO/ MEMORY Switch set to “VIDEO”, still images are recorded not only onto the tape but also in the memory card (640 x 480 pixels).