FEATURES FOR RECORDING
ADVANCED FEATURES
EN 19
MasterPage: Advan_Right
IMPORTANT:
Some Wipe/Fader Effects cannot be used with certain modes
of Program AE with special effects. (See the right column.) If
an unusable Wipe/Fader Effect is selected, its indicator blinks
in blue or goes out.
These effects let you make pro-style scene transitions.
Use them to spice up the transition from one scene to the
next.
Wipe or Fader works when video recording is started or
stopped.
1Set the Power Switch to “M” while pressing down the
Lock Button located on the switch.
2Open the LCD monitor fully. (墌pg.10)
3Set “v” to the desired mode. (墌pg.14)
●The WIPE/FADER menu disappears and the effect is
reserved.
●The selected effect indicator appears.
4Press the Recording Start/Stop Button to activate the
Fade-in/out or Wipe-in/out.
To deactivate the selected effect
Select “OFF” in step 3. The effect indicator disappears.
NOTE:
You can extend the length of a Wipe or Fader by pressing and
holding the Recording Start/Stop Button.

WIPE/FADER

OFF: Disables the function. (Factory-preset)
FADER–WHITE: Fade in or out with a white
screen.
FADER–BLACK: Fade in or out with a black
screen.
FADER–B.W: Fade in to a colour screen from a
black and white screen, or fade out from colour to black
and white.
WIPE–CORNER: Wipe in on a black screen from
the upper right to the lower left corner, or wipe out from
lower left to upper right, leaving a black screen.
WIPE–WINDOW: The scene starts in the centre of
a black screen and wipes in toward the corners, or
comes in from the corners, gradually wiping out to the
centre.
WIPE–SLIDE: Wipe in from right to left, or wipe out
from left to right.
WIPE–DOOR: Wipe in as the two halves of a black
screen open to the left and right, revealing the scene, or
wipe out and the black screen reappears from left and
right to cover the scene.
WIPE–SCROLL: The scene wipes in from the
bottom to the top of a black screen, or wipes out from top
to bottom, leaving a black screen.
WIPE–SHUTTER: Wipe in from the centre of a
black screen toward the top and bottom, or wipe out from
the top and bottom toward the centre leaving a black
screen.
IMPORTANT:
Some modes of Program AE with special effects cannot be
used with certain Wipe/Fader effects. (See the left column.) If
an unusable mode is selected, the indicator of Program AE
with Special Effects blinks or goes out.
1Set the Power Switch to “M” while pressing down the
Lock Button located on the switch.
2Open the LCD monitor fully. (墌pg.10)
3Set “r” to the desired mode. (墌pg. 14)
●The PROGRAM AE menu disappears and the selected
effect is activated.
●The selected effect indicator appears.
To deactivate the selected effect
Select “OFF” in step 3. The effect indicator disappears.
NOTES:
●Program AE with special effects can be changed during
recording or during Record-Standby.
●Some modes of Program AE with special effects cannot be
used during Night-Scope.

PROGRAM AE

OFF: Disables the function. (Factory-preset)
SHUTTER 1/50: The shutter speed is fixed at 1/
50th of a second. Black bands that usually appear when
shooting a TV screen become narrower.
SHUTTER 1/120: The shutter speed is fixed at 1/
120th of a second. The flickering that occurs when
shooting under a fluorescent light or mercury-vapour
lamp is reduced.
SPORTS
(Variable Shutter Speed:1/250 – 1/4000)
This setting allows fast-moving images to be captured
one frame at a time, for vivid, stable slow-motion
playback. The faster the shutter speed, the darker the
picture becomes. Use the shutter function under good
lighting conditions.
Wipe Or Fader Effects
Lock Button
SNAPSHOT
Power Switch
MMENU/VOL.
Program AE With Special Effects
GR-D47AG.book Page 19 Thursday, January 27, 2005 4:40 PM