18 EN FEATURES FOR RECORDING |
| |
SNAPSHOT | Night Scope | |
Power Switch | Makes dark subjects or areas even brighter than they | |
Lock Button | ||
would be under good natural lighting. Although the | ||
Recording Start/Stop Button | ||
recorded image is not grainy, it may look as if it is | ||
| strobing due to the slow shutter speed. | |
| 1 Set the Power Switch to “M” while pressing down the | |
| Lock Button located on the switch. | |
| 2 Open the LCD monitor fully. ( pg. 10) | |
| 3 Press NIGHT so that the | |
| appears. | |
LIGHT | ● The shutter speed is automatically adjusted to provide up to | |
30 times sensitivity. | ||
| ● “ ” appears beside “ ” while the shutter speed is being | |
NIGHT | automatically adjusted. | |
To deactivate | ||
| ||
White LED Light | Press NIGHT again so that the | |
disappears. | ||
|
NOTES:
White LED Light
White LED Light can be used to brighten the subject in the dark place during video recording.
1 Press LIGHT repeatedly to change the setting.
OFF: Turns off the light.
ON: The light is on always. ( 
appears.)
AUTO: The light turns on automatically when dark.
(
appears.)
2 Press the Recording Start/Stop Button to start video recording or SNAPSHOT to shoot a still image.
NOTES:
●During
•Some modes of “Program AE With Special Effects” ( pg. 19).
•“GAIN UP” in CAMERA Menu. ( pg. 15)
•“DIS” in MANUAL Menu. ( pg. 15)
●During
●Be careful not to point the LED Light directly to eyes.
●If the light does not reach the subject, the
●There is a difference in the brightness of the images shot between the centre area which is illuminated by the LED Light and the surrounding areas (which will be darker).
●Since subjects are shot at a reduced shutter speed when the White LED Light setting is “ON”, they will appear slightly blurred.
