NOTES:
●Before starting Blank Search, if the current position is at a blank portion, the camcorder searches in the reverse direction. If the current position is at a recorded portion, the camcorder searches in the forward direction.
●If the beginning or end of the tape is reached during Blank Search, the camcorder stops automatically.
●A blank portion which is shorter than 5 seconds of tape may not be detected.
●The detected blank portion may be located between recorded scenes. Before you start recording, make sure there is no recorded scene after the blank portion.
Connections To A TV Or VCR
Open the cover.
To S connector
| To AV connector |
S cable | AV cable |
(optional) | (provided) |
1 2
3
4
TV
VCR
A Black to
B Yellow to VIDEO IN (Connect when your TV/ VCR has only A/V input connectors.)
C Red to AUDIO R IN* D White to AUDIO L IN*
* Not required for watching still images only.
NOTE:
The
1 Make sure all units are turned off. |
| |
2 Connect the camcorder to a TV or VCR as |
| |
shown in the illustration. |
| |
| If using a VCR, go to step 3. |
| |
If not, go to step 4. |
| |
3 Connect the VCR output to the TV input, |
| |
referring to your VCR’s instruction manual. |
| |
4 Turn on the camcorder, the VCR and the TV. |
| |
5 Set the VCR to its AUX input mode, and set | ||
| ||
the TV to its VIDEO mode. |
| |
| ||
| To choose whether or not the following | ||
Or, press DISPLAY on the remote control to turn | ||
| displays appear on the connected TV |
| |
● Date/time |
| |
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. |
| |
on/off the date indication. | ||
| ||
● Time code |
| |
Set “TIME CODE” to “ON” or “OFF”. |
| |
| ||
● Indications other than date/time and time code |
| |
Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”. |
| |
|
CONTINUED ON NEXT PAGE