EDITING EN 51

Dubbing To Or From A VCR

NOTES:

 

 

 

 

● It is recommended to use the AC Adapter as

 

 

Open the cover.

the power supply instead of the battery pack.

 

 

( pg. 15)

To S connector

 

 

● To choose whether or not the following displays

 

 

appear on the connected TV

 

 

 

 

• Date/time

 

 

 

 

Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.

 

 

 

 

( pg. 36, 41) Or, press DISPLAY on the

 

 

 

 

remote control to turn on/off the date indication.

 

 

To AV connector

• Time code

 

 

 

 

Set “TIME CODE” to “OFF” or “ON”.

 

 

 

 

( pg. 36, 41)

 

 

 

 

• Indications other than date/time and time code

 

 

 

 

Set “ON SCREEN” to “OFF”, “LCD” or “LCD/

S cable

 

 

AV cable

TV”. ( pg. 36, 41)

(optional)

 

 

(provided)

To use this camcorder as a recorder

 

 

 

 

 

 

 

 

1 Following the illustrations, connect the

 

 

 

 

camcorder and the VCR’s output connectors.

1

2

3

4

2 Set “REC MODE” to “SP” or “LP”. ( pg. 37)

 

 

 

 

 

 

 

 

3 Set the camcorder’s Power Switch to “PLAY”.

TV

 

 

 

4 Set “S/AV INPUT” to “ON”. ( pg. 36, 41)

 

 

 

5 Press the Recording Start/Stop Button to

 

 

 

 

 

 

 

 

engage the Record-Pause mode.

 

 

VCR

 

● The “ A/V IN ” or “ S IN ” indication appears on

 

 

 

the screen.

 

 

 

 

A To S-VIDEO IN or OUT*

B Yellow to VIDEO IN or OUT

C Red to AUDIO R IN or OUT

D White to AUDIO L IN or OUT

*Connect when your TV/VCR has an S-VIDEO IN/ OUT connector. In this case, it is not necessary to connect the yellow video cable.

NOTE:

The S-Video cable is optional. Be sure to use the YTU94146A S-Video cable. Consult the JVC Service Center described on the sheet included in the package for details on its availability. Make sure to connect the end with a core filter to the camcorder. The core filter reduces interference.

6 Start playback on the player.

7 At the point you want to start dubbing, press the Recording Start/Stop Button to start

dubbing. The indication rotates.

8 Press the Recording Start/Stop Button again

to stop dubbing. The indication stops rotating.

9 Press 8 to return to the normal playback mode.

NOTES:

●After dubbing, set “S/AV INPUT” back to “OFF”.

●Analog signals can be converted to digital signals with this procedure.

●It is also possible to dub from another camcorder.

To use this camcorder as a player

1 Following the illustrations, connect the camcorder and the VCR’s input connectors.

2 Start playback on the camcorder. ( pg. 22)

3 At the point you want to start dubbing, start recording on the VCR. (Refer to the VCR’s instruction manual.)

4 To stop dubbing, stop recording on the VCR, then stop playback on the camcorder.