EN 37

Snapshot flash
B-IN FLASH

(Factory-preset: AUTO)

OFF: Will not fire.

 

AUTO: Fires automatically if it is dark ( appears).

AUTO C: Fires automatically if it is dark ( appears) and reduces the Red-Eye effect in the subject’s eyes.

ON: Always fires.

Flash brightness adjustment

FLASH ADJ.(Factory-preset: ±0) For details, refer to “Flash Brightness Adjustment” ( pg. 43).

System Menu SYSTEMBeep, melody and shutter sound
BEEP

(Factory-preset: MELODY)

OFF: Even though not heard while shooting, shutter sound is recorded on the tape.

BEEP: The beep sounds when the power is turned on or off, and at the beginning and end of recording. It also activates the shutter sound effect. ( pg. 23, 42)

MELODY: Instead of a beep, a melody sounds when any operation is performed. It also activates the shutter sound effect. ( pg. 23, 42)

Tally lamp setting
TALLY

(Factory-preset: ON)

OFF: The tally lamp remains off at all times.

ON: The tally lamp comes on to signal the start of recording.

Remote control setting

For details, refer to “USING THE REMOTE CONTROL UNIT” ( pg. 56).

REMOTE

(Factory-preset: ON)

OFF: Disables the remote control operations.

ON: Enables the remote control operations.

Automatic demonstration mode

Demonstrates certain functions such as Program AE with special effects, etc., and can be used to confirm how these functions operate. ( pg. 9)

DEMO MODE

(Factory-preset: ON)

 

OFF: Automatic demonstration will not take

 

place.

 

 

ON: Demonstrates certain functions such as

 

Program AE with special effects, etc., and can be

 

used to confirm how these functions operate.

 

Demonstration starts in the following cases:

 

•When the Menu Screen is closed after “DEMO

 

MODE” is turned “ON”.

 

 

•With “DEMO MODE” set to “ON”, if there is no

 

operation for about 3 minutes after the Power

 

Switch is set to “A” or “M”.

 

FEATURES

than 3 minutes after that, the demonstration will

Performing any operation during the

 

demonstration stops the demonstration

 

temporarily. If no operation is performed for more

 

resume.

 

ADVANCED

NOTES:

 

 

 

● If a cassette is in the camcorder, the demonstration cannot be turned on.

● “DEMO MODE” remains “ON” even if the camcorder power is turned off.

● If “DEMO MODE” remains “ON”, some functions will not be available. After viewing demo, set to “OFF”.