6 EN

How To Attach/Detach The Lens Hood

The provided lens hood helps block out glare when shooting under bright sunlight, the same way professional photographers do.

To attach:

Align the lens hood with the camcorder’s lens while the index on the lens hood is facing upward, and then screw the ring clockwise a.

To detach:

Turn the ring counterclockwise b.

Index ThreadingRing

How To Attach The Core Filter (for optional S-Video cable)

Attach the core filter to an optional S-Video cable. The core filter reduces interference.

1Release the stoppers on both ends of the core filter.

3Close the core filter until it clicks shut.

NOTES:

●If the core filter cannot be attached to the S-Video cable you have, use the optional YTU94146B S-Video cable. Consult your nearest JVC dealer for details on its availability.

●Take care not to damage the cable.

●When connecting a cable, attach the end with the core filter to the camcorder.

How To Use The Audio Cable

When using optional headphones or external microphone, connect to the provided Audio cable (with a core filter attached), then connect the Audio cable to the camcorder. The core filter reduces interference.

Stereo microphoneStereo headphones

Audio cable (provided)

Stopper

2Run the cable through the core filter, leaving approx. 3 cm of cable between the cable plug and the core filter. Wind the cable twice around the outside of the core filter as shown in the illustration.

● Wind the cable so that it is not slack.

3 cmWind twice.

Open the connector cover.

To MIC Core filter

To (headphones)